V02.06.06.00 firmware update

Whiskey_Throttle · May 29, 2018

Anyone try this with the P4P? Supposed to fix overheating and bring back the ability to download maps off-line.

Brent10 · May 29, 2018

Whiskey_Throttle said:
Anyone try this with the P4P? Supposed to fix overheating and bring back the ability to download maps off-line.

I flew a CS 7" HB with this version and my P4P on a 92°F day using Go4. Although I didn't try offline maps I had a good experience.
Also, I was happy that it fixed the jerky live feed in the official Amazon store CS version of Litchi.

ryantrax · May 29, 2018

I updated and re-rooted yesterday, no problems. Offline maps worked like a charm, the area per map download is smaller than I thought, wish you were able to select larger areas at a time.

Whiskey_Throttle · May 30, 2018

Sounds like an improvement - I'll give it a try tonight.

lickitysplit11111 · May 30, 2018

Is anybody else having to "Reboot" the CS after the FW update, I get a screen freeze/unresponding pretty much every flight

ryantrax · May 30, 2018

lickitysplit11111 said:
Is anybody else having to "Reboot" the CS after the FW update, I get a screen freeze/unresponding pretty much every flight

I've only had a couple flights on mine since the update but mine has been good.

5150 Flyer · May 31, 2018

lickitysplit11111 said:
Is anybody else having to "Reboot" the CS after the FW update, I get a screen freeze/unresponding pretty much every flight

I had to reboot a couple of times. I have a standard P4 and had the Go4 app crash on me a couple of times...

lickitysplit11111 · May 31, 2018

5150 Flyer said:
I had to reboot a couple of times. I have a standard P4 and had the Go4 app crash on me a couple of times...

Yup for me it happens at start up or soon after...

5150 Flyer · May 31, 2018

Additionally I've encountered the a pop up message "Go 4 isn't responding" a couple of times since the new update and had to perform a reboot to clear the warning. I decided to do a CS reset (included reformatting SD card in CS) but I haven't been able to test the CS after the reset.

lickitysplit11111 · May 31, 2018

5150 Flyer said:
Additionally I've encountered the a pop up message "Go 4 isn't responding" a couple of times since the new update and had to perform a reboot to clear the warning. I decided to do a CS reset (included reformatting SD card in CS) but I haven't been able to test the CS after the reset.

Yup thats what I get , where's the reset located at in the Menu , I'll try it.
Edit
I found it, does it roll back to the firmware that was installed in the factory ? It says "Factory data reset"

5150 Flyer · May 31, 2018

settings --> Backup & Reset --> Factory Data Reset

No. It keeps the latest CS update. It flushes out files that may be causing a conflict with the latest update.

lickitysplit11111 · May 31, 2018

5150 Flyer said:
settings --> Backup & Reset --> Factory Data Reset

No. It keeps the latest CS update. It flushes out files that may be causing a conflict with the latest update.

OK thank you I'm doing it now ,as soon as it stops raining im gonna go try

5150 Flyer · May 31, 2018

lickitysplit11111 said:
Yup thats what I get , where's the reset located at in the Menu , I'll try it.
Edit
I found it, does it roll back to the firmware that was installed in the factory ? It says "Factory data reset"

I'm not going to be able to test my CS until the weekend.

lickitysplit11111 said:
OK thank you I'm doing it now ,as soon as it stops raining im gonna go try

Sweet! Let me know how it goes!

lickitysplit11111 · May 31, 2018

5150 Flyer said:
I'm not going to be able to test my CS until the weekend.

Sweet! Let me know how it goes!

Thats not a cure it actually made it worse I had to reboot three times and it still didnt connect I then shut both the copter and RC down two times then it connected, it started raining so I wrapped it up

5150 Flyer · May 31, 2018

lickitysplit11111 said:
Thats not a cure it actually made it worse I had to reboot three times and it still didnt connect I then shut both the copter and RC down two times then it connected, it started raining so I wrapped it up

Wow! That really sucks! Sounds like we're going to have to wait for DJI to send out yet another update for the CS...

5150 Flyer · May 31, 2018

We're going to need to get on DJI's CrystalSky forum and complain about about these issues...

lickitysplit11111 · May 31, 2018

5150 Flyer said:
Wow! That really sucks! Sounds like we're going to have to wait for DJI to send out yet another update for the CS...

I'm gonna give it another try later, I'll post afterwards

5150 Flyer · May 31, 2018

lickitysplit11111 said:
I'm gonna give it another try later, I'll post afterwards

Cool... I would also recommend reformatting the SD cards in both the CS and the Phantom just to rule out any weird inconstancy from the previous firmware.

lickitysplit11111 · May 31, 2018

5150 Flyer said:
Cool... I would also recommend reformatting the SD cards in both the CS and the Phantom just to rule out any weird inconstancy from the previous firmware.

Yes I always reformat but I see no need to stick a card in the CS cause it doesn't record to it , I just use a card reader on the copters sd card