Recommend me an FPV system!

[badbrad97]

I am not familiar yet with RHCP and LHCP, what is that?

It is the direction the Antenna is wound. Yes... google your tx and rx. that's how I found what channels to try and how to tune.

OMG. This is so simple now that I have found the frequency charts for my equipment. (All missing from my packaging)

The 32 channels on my Boscam RX-LCD5802 correspond to the 32 channels on the 600mw Boscam TS832. I do not have the ImmersionRC after all (See charts below) I also noticed that frequencies on the 7 channel 400mw correspond to one group straight across on my receiver.

When letting the receiver scan for channels on its own. IT DID NOT FIND THE CORRECT CHANNEL! Once I MANUALLY input the channels the picture is crystal clear. I have not done any distance testing but I can tell already it is the best it has been yet.

Hope this helps someone else with the Boscam RX-LCD5802

 

[badbrad97]

Tested last night and got 1000 meters easy (no breakup) with LOS. I also went the other way and got 600 meters at 100 meters high with woods and houses blocking me. This was is what I really needed for real estate video.

Thanks for all the help.

Boscam TS832 on channel 32
Boscam RX-LCD5802 Manually entered C-2
Antennas IBcrazy BluBeam
http://www.getfpv.com/5-8ghz-blubeam-whip.html

 

[bzpop]

Hope this helps someone else with the Boscam RX-LCD5802

i hope so too
i just ordered the same combo, mostly because of the small size of the transmitter, AND your comment
i don't need 1Km, probably 200-300meters,
how do you install this?
do i need a hub, do i cut my PH2 open?
thx!

 

[quality control]

This is cheap and works very well:

Boscam TS353 400mw: http://j.mp/1gJ6t7s
Boscam 7" RX-LCD5802 5.8GHz Diversity Receiver: http://j.mp/1lZuham
LCD Battery Charger: http://j.mp/1h3CreQ

With stock antennas you should get arround 1km range, changing antennas you could get 2km+. I recommend helical and cloverleaf.

[youtube]http://www.youtube.com/watch?v=Te9VbVg9EUM[/youtube]

Total price with antennas will be arround 250$.

You can get a 10$ cupon to Banggood if you register here: http://j.mp/RkDaDl

Ghost,

I am looking at the same setup as above. I am curious what the exact antennas you are using for this flight are?

 

[GhostMaster]

This is cheap and works very well:

Boscam TS353 400mw: http://j.mp/1gJ6t7s
Boscam 7" RX-LCD5802 5.8GHz Diversity Receiver: http://j.mp/1lZuham
LCD Battery Charger: http://j.mp/1h3CreQ

With stock antennas you should get arround 1km range, changing antennas you could get 2km+. I recommend helical and cloverleaf.

[youtube]http://www.youtube.com/watch?v=Te9VbVg9EUM[/youtube]

Total price with antennas will be arround 250$.

You can get a 10$ cupon to Banggood if you register here: http://j.mp/RkDaDl

Ghost,

I am looking at the same setup as above. I am curious what the exact antennas you are using for this flight are?

Helical from circular wireless its the best money can get: https://www.circular-wireless.com/produ ... liaxial58/

And boscam cloverleaf antennas, cloud spirit ones.

 

[dvc]

1. DJI AVL-58
2. iOSD mini
3. DJI FPV Hub
4. Boscam 5802 Rx Monitor
5. Fatshark Spironet Antenna (Or u can use the matching DJI Cloverleafs)

Where can I get all of this in a bundle?

 

[xavpil]

Boscam TS832 on channel 32
Boscam RX-LCD5802 Manually entered C-2
Antennas IBcrazy BluBeam

Hey Brad, so this is the set up you went with?
How is it working for you?

 

[thesystemera]

Hi all. New to this.

So far I have ordered the: DJI Phantom 2 with the HS-S3 Gimbal + GoPro 3 Black+

What I'm after is a good FPV solution, I was wondering if there is any updates regarding good packages and also would it be worth considering the extra money and going for the LightBridge solution, I think LightBridge is going for about a $1000.00 but what excites me about it, is if I am correct, it has iPad integration. I like the idea of using the one device for both LightBridge and Ground Station, not to mention if I upgrade my quad I should be able to transfer these products.

Sorry for the daft inquiry.

Can any one recommend any bundles that come complete, don't mind soldering. Thanks.

 

[thesystemera]

This kit looks interesting, however it does not contain the monitor or batteries required for the monitor. I would love to just find a complete package, hopefully under $400.00 US?

http://www.helipal.com/dji-avl58-fpv-sy ... tenna.html

 

[GhostMaster]

This kit looks interesting, however it does not contain the monitor or batteries required for the monitor. I would love to just find a complete package, hopefully under $400.00 US?

http://www.helipal.com/dji-avl58-fpv-sy ... tenna.html

The LCD i recommend includes everything, the Boscam RX-LCD5802 has built-in receiver and battery.