Just got the P3 back from a shell replacement.
Upgraded to 1.6, went well but I see my 32 channels have gone back to 8.bugger!
Upgraded to 1.6, went well but I see my 32 channels have gone back to 8.bugger!
P3 Professional 1.6 firmware update issues
- Thread starter IPOA
- Start date
- Joined
- Dec 26, 2015
- Messages
- 18
- Reaction score
- 6
- Age
- 55
I have a month old P3P and trying to update the firmware from my current 1.5.30 to the 1.6. I have three SD cards a 64gb SandDisk micro xc1, SanDisk Extreme Pro micro xc1, and the manu Panasonic 16gb. I have formatted all three cards via the aircraft module. I have uploaded the latest 1.6 bin file from the DJI website and placed it in its own root file.
I stick the card into the aircraft and turn it on. I do not get any beeps and the gimbal platform light is a solid green. I have left the card in the aircraft for 30 minutes for each SD card, trying all three SD cards with the same results. I do not get any TXT files either or a failure/success message. I am at a loss....
My versions are:
App 2.4.3
Aircraft 1.5.30
RC 1.5.70
Any suggestions are welcome...
I stick the card into the aircraft and turn it on. I do not get any beeps and the gimbal platform light is a solid green. I have left the card in the aircraft for 30 minutes for each SD card, trying all three SD cards with the same results. I do not get any TXT files either or a failure/success message. I am at a loss....
My versions are:
App 2.4.3
Aircraft 1.5.30
RC 1.5.70
Any suggestions are welcome...
I kept restarting it. as soon as it goes solid red, forget about it and restart, with the same SD card and Firmware installed.
I think my problem was that I kept formatting the SD card, then trying another fresh firmware install.
I think my problem was that I kept formatting the SD card, then trying another fresh firmware install.
Is the .bin file in a folder? It should just be on the SD card without anything else.
The file is the same version you have already. The upgrade file should be P3X_FW_V01.06.0040.bin for the battery fix.
Im new to all this ... how to I check the current version of what is installed ... i have new phantom just out of the box and have update required warnings for everything
- Joined
- Dec 26, 2015
- Messages
- 18
- Reaction score
- 6
- Age
- 55
Stujol,
Here is what I have on all of my SD cards as well as my P3P versions. Thanks for your help!!
- Joined
- Dec 26, 2015
- Messages
- 18
- Reaction score
- 6
- Age
- 55
Holt, here is the .bin file in its own directory. When I formatted each SD card, the DCIM folder is placed in its own directory. Thanks for your help!!!
- Joined
- Dec 26, 2015
- Messages
- 18
- Reaction score
- 6
- Age
- 55
Hey TC,
Don't follow my lead
My quad will not update so I am seeking help from the members. I was replying to a couple of members who had questions for my problem. Good luck!! There are a lot of good guys on this forum willing to help us newbies.Your file name is wrong, P3X_FW_V01.06.0040-7.bin should just be P3X_FW_V01.06.0040.bin
- Joined
- Dec 26, 2015
- Messages
- 18
- Reaction score
- 6
- Age
- 55
Thanks Stujol!! I have no clue how the 7 got in there as it was downloaded directly from DJI's website. I will get rid of it when I get home tonight and try again. Thanks a bunch!!
in the dji go app click on general settings (top right) and scroll on the way to the bottom and click on about.
- Joined
- Dec 26, 2015
- Messages
- 18
- Reaction score
- 6
- Age
- 55
Update....Its UPDATED
Thanks for your help...something so simple I overlooked. Apparently each time I deleted and downloaded the bin file, the MAC created a version number so to speak at the end of the file. Lesson learned...now for this snow to go away!!Mine was bricked doing an upgrade to 1.5. It would start and then make a steady tone. If you load the SD card and look in the misc folder there is a more detailed log file. If it says that some wade ices were not found you need to send it in. They got mine back in less than 3 weeks
Glad to hear, I was suspecting that from the start. Been there but mine was a pc that renamed the file because I already had one in the folder.Update....Its UPDATED
