P3 firmware downgrade from 1.8
- Thread starter afgsilva
- Start date
Thanks for all of you that push me to try again. It always worth.
I sorry for be seen not believing in you sometimes.
I sorry for be seen not believing in you sometimes.
Enjoy flying and never give up. Always remember safety first. Happy flying. I've learnt from others and don't mind to share my knowledge.
Put the 1.7 firmware on the sd card, make sure it only has the extracted bin file on it and nothing else. Put the card into the gimbal and turn the AC on do not power the transmitter or the GO app shut the power to the AC off after a few seconds. Now take a ballpoint pen and depress and hold the button that links the RC to the AC you must hold it and turn power on to the AC at the same time..once the AC beeps a couple of times let go of the button to link the AC to the RC the AC will start to download the firmware. you know the rest...listen for the proper audible signals
Oso
Premium Pilot
hello i upgraded this tonight and it takes a little time. we have to be patient
let me explain my experience.
it was longer than every other upgrades
in a few minutes all the lights went off and just the gimbal light and the beeping sound........
4 minutes more and the light begin to blink (i was just going to turn it off)
beeping blinkink lights and few minutes the camera went down make some movements......
result success
let me explain my experience.
it was longer than every other upgrades
in a few minutes all the lights went off and just the gimbal light and the beeping sound........
4 minutes more and the light begin to blink (i was just going to turn it off)
beeping blinkink lights and few minutes the camera went down make some movements......
result success
