Need Help Reassembling Phantom Vision 2 Plus

scpalmetto · Jun 28, 2014

I need some help putting my Phantom 2 Vision Plus back together. My Phantom fell into a reflection pond and I disassembled it so I could pack it in rice.
I took pictures as I disassembled it but unfortunately some of the pictures showing where some of the connections go are not clear enough see exactly where some wires are connected -- especially on the Naza.

I have the M1,M2,M3,M4 connected to the middle pins. (http://i656.photobucket.com/albums/uu28 ... _48101.jpg)
I'm Not sure about the other side.
In the Pic3 you can see in the background I've connected two wires in the top pins for the A,E,T,R,U,X1,X2,X3 (Not sure if this is correct). However I'm not sure about the two wires that I'm holding in my hand between my index and middle finger and the one between my thumb and ring finger. (http://i656.photobucket.com/albums/uu28 ... _48011.jpg)
Also not sure about the wire in Pic2. (http://i656.photobucket.com/albums/uu28 ... _48021.jpg)
Thanks for any help you can give.

ryanhoelzer · Jun 28, 2014

I haven't watched the whole thing but you might take a look at this.

viewtopic.php?f=27&t=12610&p=170028&hilit=teardown#p170028

J Dot · Jun 28, 2014

Hello,
I don't have the PLUS, but here is my P2V NAZA hook ups:

Here is the correct ( Stock ) P2V NAZA-M wiring.

Picture 1:

The Camera Servo wire connects ( Vertically ) up-down on ( F2 slot on NAZA-m box )
( see pic 1 above for correct color placement )

The wire next to M2 plug on MC ( main controller ) plugs ( Horizontally )
Side-side ( bottom most pins ) across ( M1/M2/M3/M4 ) pins!
( see pic 1 above for correct color placement )

Ok,
Picture 2

USB Com port wire, ( plugs Horizontally ) top most pins, across
( A, E, T, R. Pins )
( see pic 2 for correct color placement )

Picture 3:

This wire hooks ( horizontally ) across ( U, X1, X2, X3 ) pins ( top most pins
( see pic 3 for placement )

Picture 4:

Wire #1 hooks ( vertically ) on X1 slot ( goes under pic 3 wire )
Wire #2 hook ( vertically ) on X2 slot
( also goes under pic 3 wire )
Wire #3 hooks ( Vertically ) on X3 slot
( goes under pic 3 Wire )

Hope this helps!

Take Care, Fly Safe!