ITElite DBS Mod Not easy!!
- Thread starter FatTwoTonTony
- Start date
Great install!! Are the sunhans chargeable? Think I can see a power lead on there?
Thanks. The sunhans use a dual battery lead 3000 mah . You can find them on ebay or fpvlr.com sell them and there's a couple other places too.
Here's what it looks like after my self modification is done. The DBS was installed first until I decided to boosted it. Booster mount is made by MaxxUAV. Pretty neat design and their customer service is incredibly fantastic. Shoot them an email and you will have your answer in minutes...
Attachments
Last edited:
Nice setup. How are your RP-SMA female connectors attached at the RC stock antenna holes?
Looks like some 3d printed clips hold them in. Jake @ maxxuav.com would be the man to ask . He put together that whole setup for me.
He posted a photo of the controller opened, so I thought Aquarius4058 installed the internal cables.
I did the internal modification myself. Been using it without the booster for quite sometime and I finally purchased the booster kit when I saw a nice clean setup from MaxxAUV. Jake did a pretty good job designing the bracket and the idea of using a power core which makes the whole setup really look sharp..
Yes, I know. That's why I was wondering how they are attached to the stock antenna holes. Are they glued? Clamped with a nut and washer? Hidden attachment inside the stock antenna holes?
I also have RP-SMA's attached through my stock antenna holes via nut and washer on the outside of controller and a hex-type flange on the inside end of connector. Example of RP-SMA connector with cable shown below.
I am not him but it looks like he is using a 3d printed product available at maxxuav.com to accomplish this. Its somethibg new. Even fpvlr guys are going this way now. No more drilling
DJI - Antenna Plugs (Open)
I am not him but it looks like he is using a 3d printed product available at maxxuav.com to accomplish this. Its somethibg new. Even fpvlr guys are going this way now. No more drilling
DJI - Antenna Plugs (Open)
Yes, phantom13flyer is using those, but Aquarius4058 is not. Based on the photos he posted in post #145, he's using something else.
MaxxAUV has those printed SMA's retainer for the stock holes available. But in my case they aren't available when I did the internal modification and I used a bit of 5 minute epoxy to secure the SMA jacks.
Here's my mod setup inside my hard case. This will be reorganized later when I received the new replacement foam I ordered. Hard case is a Seahorse #920.
Attachments
Similar threads
