Help please P2V

[Todd Oleson]

I have a P2V and haven’t used it for a few years due to not being able to see the camera on my iPhone. I just get a message that reads “Phantom connection broken” I’m sure there’s a fix for this but I’m not very knowledgeable on this subject. Can any body provide help with this in very simple language or provide a shop that I can get it repaired?
Thanks for any help you provide.
Todd

 

[J Dot]

Try this

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

J Dot


( to reset extender
1) turn on extender
2) wait 45 seconds
3) press and hold reset button for 3 seconds
4) release reset button, wait for extender to reboot
Type in MAC address per video above!

 

[Todd Oleson]

Try this

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Thank J Dot I watched the video but it’s not much help due to it is out of focus most of the time.
If there’s anyone that knows how to correct this problem and would be willing I’d sure like to hear from you.

J Dot


( to reset extender
1) turn on extender
2) wait 45 seconds
3) press and hold reset button for 3 seconds
4) release reset button, wait for extender to reboot
Type in MAC address per video above!

 

[Todd Oleson]

Try this

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

J Dot


( to reset extender
1) turn on extender
2) wait 45 seconds
3) press and hold reset button for 3 seconds
4) release reset button, wait for extender to reboot
Type in MAC address per video above!

 

[Todd Oleson]

J Hop
Thanks for the reply, but the video is out of focus most of the time. So it wasn’t much help.
If there’s anyone knows how to correct this problem and is willing to do it I’d sure like to hear from you.
Thanks

 

[jwax]

"but the video is out of focus most of the time"? Sure the lens cover is off? Do you have a connection now? Do you have video now?

 

[Riseandrun]

I think he's talking about your video above....

 

[Todd Oleson]

Yes I’m talking about the video you sent it’s out of focus most of the video. I haven’t tried the repair you sent because I can’t see what he is doing.
Thanks

 

[J Dot]

Turn on or open ( InSSIDer ) android app,
Once open
Turn only craft on ( no tx and no extender ) only bird.
Watch InSSIDer app for a code starting with

60:60:1f:??:??:??

The question marks in code above, is your individual MAC address!

If you see the ( 60:60:1F: ) code ( write it down )

If you do NOT see a code, there is a problem with wifi unit or board

Ok ( assuming ) you got the code

Turn on range extender ( wait 40 seconds ) press and hold the reset button for 3 seconds, then release it.
Turn on Tx, and bird
Wait for phantom wifi to establish,
Hook up as usual, and open app ( dji vision app )
Choose SETTINGS
SCROLL TO ( BINDING )
Bottom line MANUALLY TYPE THE CODE ( you wrote down ( 60:60:1f:??:??: ) the click the BLUE CHECK ( top right )
When new screen appears, click the BLUE CHECK again, ( topright )

Now turn EVERYTHING OFF!

Now
Startup as usual, but choose CAMERA when you open vision app!

Let us know, it might take a couple tries to work?

J Dot

 

[Todd Oleson]

Thanks J Dot I’ll try it tomorrow.

 

[Paradillon]

Have you seen the P2 Care Plan that DJI is extending to those of us that seem to be in your situation?

DJI to Offer “P2 Care Plan” for Certain U.S. Phantom 2 Series Users.