New Phantom 3 Standard. The flight battery lowers voltage after a specified number of days. There is no such mechanism for the controller batteries. Should we leave the controller on between planned flights until the lights how about half used up? Are the controller batteries replaceable?
Controller Battery
- Thread starter Bruce Stevens
- Start date
msinger
Approved Vendor
- Joined
- Oct 30, 2014
- Messages
- 32,157
- Reaction score
- 10,917
- Location
- Harrisburg, PA (US)
- Website
- phantomhelp.com
No. There is no need to attempt to drain the remote controller battery. Just charge it up when it gets low.
DJI does not sell a replacement battery. If your battery ever needs to be replaced (not likely), you can send your remote controller back into DJI for repair or open it up and replace it with a compatible battery.
So the controller battery does not have the same requirements as other Li-Pos?
Thanks
msinger
Approved Vendor
- Joined
- Oct 30, 2014
- Messages
- 32,157
- Reaction score
- 10,917
- Location
- Harrisburg, PA (US)
- Website
- phantomhelp.com
Where could I buy a 'compatable battery' for a DJI Phantom 3 Remote Controller? Mine needs replacing because I am getting a red flashing light and continuous beeping when trying to charge. DJI guidelines suggest this could be a battery problem, so I'd rather try that first before buying a whole new controller. Thank you.
I have the battery out. It looks fine, but I cannot test it for power (do not have correct equipment). I'm just taking a gamble on it being the battery. I just want to source the company that make the batteries and get another one.
should have the voltage and maH rating on the battery. just do a google search. get the same voltage and at least the same maH battery. you can make one a little longer fit by cutting a little plastic from inside the controller. When I had mine apart I thought about doing it so I didn't have to charge it as often.
The controller battery on the P3S is detailed in the specs to be 2600 mAh LiPo 18650... which is very weird, as ALL18650 cells uses Li-Ion chemistry. I think it's a typo.
Anyway, these should be fairly easy to replace using an equivalent battery such as this: Amazon.com: Tenergy Li-Ion 18650 3.7V 2600mAh Rechargeable Battery module with PCB and Bare Leads: Electronics
Anyway, these should be fairly easy to replace using an equivalent battery such as this: Amazon.com: Tenergy Li-Ion 18650 3.7V 2600mAh Rechargeable Battery module with PCB and Bare Leads: Electronics
- Joined
- May 18, 2016
- Messages
- 244
- Reaction score
- 37
- Age
- 36
RodPad
Premium Pilot
You are charging with controller off? Some have tried with it on.
Have you tried another source to charge your remote?
Is it easy to switch out the connections at the end of the wires on lithium-ion batteries? Would I shock myself? 
I see several suitable batteries for replacing the battery in my remote for my P3P, but the connections look slightly different. A picture of the battery I need to replace is attached, as well as a picture of the battery I think would be a suitable replacement.
I see several suitable batteries for replacing the battery in my remote for my P3P, but the connections look slightly different. A picture of the battery I need to replace is attached, as well as a picture of the battery I think would be a suitable replacement.Attachments
i have a spare parts donor controller shipping is 7 bucks, shoot me a fair offer for battery from controller 3 months out of box
Re read. My battery is for Standard Controller.
Sent from my iPhone using PhantomPilots mobile app
Sent from my iPhone using PhantomPilots mobile app
Similar threads
