Its telling me its the same software as previous update for the controller FYI.Yes it you didn't in the penultimate update.
Its telling me its the same software as previous update for the controller FYI.Yes it you didn't in the penultimate update.
I'm already customized to ultrasonic errors, ignore and continue flying.Yep, I have ultrasonic errors every flight after the firmware update. Unacceptable, and now I'm about half afraid what may happen next...
I thought the VPS was only good up to 9'-10'??Swear I read that somewhere in the paperwork?It shouldn't be active at 20'. Going to try it again later, but the update seems okay.
I thought the VPS was only good up to 9'-10'??Swear I read that somewhere in the paperwork?
Btw, they have the Phantom 3 restricted a lot on what it is capable of.
Are you using a 3rd party filter (ND, CP) on your camera .... like the PolarPro model .... by chance?I have my P3P for about two weeks now. Out of the box it flew fine. It does fly fine today but the Pilot app shows several errors, the gimbal is working too hard and causes a message "Gimbal motor overload". The VPS is not working properly and shows"Ultrasonic system error, land as soon as possible". I notice a instabil behaviour in the first minute after taking of. Hovering is more inaccurate then before the upgrade. I am not happy with the upgrade and I worrie about the gimbal doing more work then it has to do. It does'nt seemto bee good for the construction of it. The updated Pilot app is a dragon... it crashes 3 times per flight and does not show the accurate heigth of the Phantom. And it is slowwwwwwwww..... Pffffffff, I like the Phantom and the images it gets. The flying is very fine but I do not need these shabby upgrades. It's not "Professional". I wish I did not do the upgrade; there was nothing wrong but the signs of the app where clear: you DO need the upgrade. Now I wonder: why...............
BTW: I do have fun with the thing
-----
P3P
Android
Netherlands
Nope, I use the Phantom right out of the box.Are you using a 3rd party filter (ND, CP) on your camera .... like the PolarPro model .... by chance?
Yeah... it's also supposed to WORK too, but that aint happening either.It shouldn't be active at 20'. Going to try it again later, but the update seems okay.
Now all we need is someone else still experiencing the VPS issues to try what you did and we have ourselves a winner.Update on this, very strange. I had done the upgraded firmware and got "success" in the text file, but I decided to go ahead and put the .bin file back on the card and reboot. I did that, and left it for at least half an hour. It didn't appear to do anything. I then redid the IMU calibration, etc.
Now - seems totally fine. VPS working like normal, no more ultrasonic sensor errors.
Is it possible that the firmware did not, in fact, load correctly, but just said it had?
Yep, the same thing happened to me. It seemed to correct itself after a while. I didn't have that problem on subsequent flights, only on the first flight after the update.Gents, I found a problem with the new firmware. It may be widespread or just on my bird (doubt it). My VPS isn't working properly. Once the craft is about 4'feet from the ground it descends to the ground without notice. It won't hold altitude under 10 feet. It just lands and not too slowly either. Just an FYI to keep your hands on your controls and eyes in the sky when your bringing her in. Has nothing to do with battery level etc and I checked and double checked all settings. Ugh. Come on DJI. And yes, no issues with my bird prior. It flew fine 20 mins before the firmware was updated. Thx and I hope this helps a few of you out there avoid meltdown. Let's hope there is a fix lined up for this.
We use essential cookies to make this site work, and optional cookies to enhance your experience.