Balancing a genuine new DJI propeller

[Kima kim]

Is it really necessary to balance new Genuine DJI Propellers?

 

[BaDaML]

I have found, of all the different props i have used on different quads and hexes, the dji p3 props are by far the best when it comes to balance. Having said that, i still balance mine. They aren't off by much, but considering it's what keeps the craft in the air and is the primary moving part, it's a small thing to do for extra insurance.

 

[captainmilehigh]

I have found, of all the different props i have used on different quads and hexes, the dji p3 props are by far the best when it comes to balance. Having said that, i still balance mine. They aren't off by much, but considering it's what keeps the craft in the air and is the primary moving part, it's a small thing to do for extra insurance.

Agree. I'd say 95% of mine have been perfect from the start, but every now and then one is a little off.

Balancing props is a good rainy day project when you can't fly, or the wind is howling. I use a green marker and put a little green dot on the hub when they have been checked or balanced. That way I'm sure it's good to go. Fly Safe ! [emoji3]


Sent from my iPad using PhantomPilots

 

[J Dot]

+1,
I find about 50% are truly balanced, other 50% slightly off.( but not bad ) But like above, I ALWAYS balance my props, takes 5 minutes to do all 4. Time well spent! Well balanced craft ( correctly calibrated ), well balanced props, makes for smooth footage, and stable flight! ( plus added bonus, balanced props lead to longer motor bearing life as well. ). So lots of advantages to advantage of!

Hope this helps.
J Dot

 

[msinger]

About 50% of my DJI props have also been just a bit off balance. While they would have probably been fine to use as-is, I like to balance them since I already have the tools to do it on hand. Here's an example of how it's done:

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

As for the tools needed to balance the props, you can find a list of compatible prop balancers and rods here.

 

[Kima kim]

Do you suggest putting the same "tape" to balance the hub or should we remedy it with the sandpaper?

 

[alokbhargava]

In my case almost all props needed balancing


Sent from my iPhone using PhantomPilots

 

[msinger]

I use tape since it's easier to do and does not permanently alter the props. A thin strip of clear Scotch tape on the underside of the light side of the prop will do it.

 

[Kima kim]

I use tape since it's easier to do and does not permanently alter the props. A thin strip of clear Scotch tape on the underside of the light side of the prop will do it.

Thank you msinger.
Yes, putting a Scotch tape would be wiser as it would also not mess with the "integrity" of the props material. Will balance the props. Thanks!

 

[Kima kim]

In my case almost all props needed balancing


Sent from my iPhone using PhantomPilots

Thanks for dropping off a reply...will balance mine too.

 

[Kima kim]

+1,
I find about 50% are truly balanced, other 50% slightly off.( but not bad ) But like above, I ALWAYS balance my props, takes 5 minutes to do all 4. Time well spent! Well balanced craft ( correctly calibrated ), well balanced props, makes for smooth footage, and stable flight! ( plus added bonus, balanced props lead to longer motor bearing life as well. ). So lots of advantages to advantage of!

Hope this helps.
J Dot

Thanks!

 

[Kima kim]

I have found, of all the different props i have used on different quads and hexes, the dji p3 props are by far the best when it comes to balance. Having said that, i still balance mine. They aren't off by much, but considering it's what keeps the craft in the air and is the primary moving part, it's a small thing to do for extra insurance.

Thanks!