Avegant Glyph anyone connected to phantom 4 pro?

Frankc · Jun 27, 2017

I was going to get a pair of BT300 fpv glasses but apparently, according to Samsung, they will not connect to the Phantom 4 Pro Plus.

So anyone connected their Phantom 4 Pro Plus to the Avegant Glyph?

Thanks.

msinger · Jun 27, 2017

The Avegant Glyph headset can be connected to the P4P remote controller via the HDMI output on the HDMI output module. That module can be installed on the P4P remote controller in about 5 minutes like this.

Frankc · Jun 27, 2017

Frankc said:
I was going to get a pair of BT300 fpv glasses but apparently, according to Samsung, they will not connect to the Phantom 4 Pro plus.

So anyone connected their Phantom 4 Pro Plus to the Avegant Glyph?

Thanks.

Thanks for the thought though.

msinger · Jun 27, 2017

The P4P is the same thing as a Phantom 4 Pro. No?

FlashBuddy · Jul 1, 2017

Frankc · Jul 1, 2017

Not the same as the Phantom Pro Plus though..............

msinger · Jul 2, 2017

Frankc said:
Not the same as the Phantom Pro Plus though..............

True. You edited your posts and added in the "Plus" later though

To answer your question -- yes, the Avegant Glyph headset can be used with the P4P+ remote controller.

Frankc · Jul 2, 2017

Nice one

Thanks.

davcomNZ · Jun 23, 2018

Adding my question here instead of creating a new thread because I think it's still relevant to the P4P+ controller and this thread.

Does anyone know whether this still applies (Avegant Glyph with P4P+ controller) to a P4P+ Obsidian drone that uses the GL300E controller, which has the built-in monitor and pre-installed DJI app ?
The GL300F controller for the P4P+ Obsidian has no built-in monitor or preinstalled DJI app so whatever the operator connects (mobile/tablet) to run the DJI app might make a difference to how or whether you can still use the Avegant Glyph ?
(Was initially hoping to use the Epson BT300's but they also have a preinstalled DJI app, which would conflict with the preinstalled DJI app in the GL300E controller, so looking elsewhere and the Glyph seems a good choice.)

Frankc · Jun 23, 2018

Good question! Hope we get a reply.

msinger · Jun 23, 2018

davcomNZ said:
Does anyone know whether this still applies (Avegant Glyph with P4P+ controller) to a P4P+ Obsidian drone that uses the GL300E controller, which has the built-in monitor and pre-installed DJI app ?
The GL300F controller for the P4P+ Obsidian has no built-in monitor or preinstalled DJI app so whatever the operator connects (mobile/tablet) to run the DJI app might make a difference to how or whether you can still use the Avegant Glyph ?
(Was initially hoping to use the Epson BT300's but they also have a preinstalled DJI app, which would conflict with the preinstalled DJI app in the GL300E controller, so looking elsewhere and the Glyph seems a good choice.)

The Avegant Glyph headset can only be connected to the HDMI port on the GL300E or GL300F. If using the GL300F, you'll also need to install the HDMI Output Module on the back of the remote controller (since it does not have an HDMI port).

davcomNZ · Jun 24, 2018

msinger said:
The Avegant Glyph headset can only be connected to the HDMI port on the GL300E or GL300F. If using the GL300F, you'll also need to install the HDMI Output Module on the back of the remote controller (since it does not have an HDMI port).

Many thanks for the quick reply.
Has helped me make my mind up about whether to buy them.