What'd I 4get? Controller Problem

Billy Banana · Mar 28, 2018

I am trying to use the controller from my first P3S with my newest P3S. I was able to link them. I have control of the gimbal and I am connected with the litchi app but the motors will not fire up so I can not take off. Am I forgetting something?
Thanks

msinger · Mar 28, 2018

Billy Banana said:
the motors will not fire up

How are you attempting to fire up the motors? Did you disable beginner mode (or go outdoors)?

Billy Banana · Mar 28, 2018

Yup it's disabled and I'm outside. I pull down and in on the control sticks to start.

msinger · Mar 28, 2018

Which message is displayed at the top of the camera view in DJI GO?

Billy Banana · Mar 28, 2018

Connected. It all seems normal...

msinger · Mar 28, 2018

Are you sure it shows "Connected" on the camera view screen? It should be showing something like "Safe to fly (GPS)".

Deleted member 62848 · Mar 28, 2018

Just reading and thinking,would rc calibration help,brain dead can't remember if litchi has setting,dji has it..does it start without app

Billy Banana · Mar 28, 2018

msinger said:
Are you sure it shows "Connected" on the camera view screen? It should be showing something like "Safe to fly (GPS)".

Yes Thats it. I was no longer playing with it so I forgot the exact wording

Billy Banana · Mar 28, 2018

ianzone said:
Just reading and thinking,would rc calibration help,brain dead can't remember if litchi has setting,dji has it..does it start without app

Idk. Maybe. I did do a calibration with the dji app first

msinger · Mar 28, 2018

If you're sure it's showing "Safe to fly (GPS)", then I'd recommend you try calibrating the remote controller sticks again.

Deleted member 62848 · Mar 28, 2018

Try conect again with litchi while conected swipe screen down turn off wifi then turn back on,i just try on my p3s and litchi and unsure if it was the new version that did it (playstore app)mine came up disconected so I turn wifi off then back on and me motors started..New version for djigo was what I meant

Billy Banana · Mar 28, 2018

msinger said:
If you're sure it's showing "Safe to fly (GPS)", then I'd recommend you try calibrating the remote controller sticks again.

Ok I will try that tomorrow. Thanks

Billy Banana · Mar 29, 2018

The Litchi app was not telling me the battery was too cold. I decided to see what would happen using the go app and once I saw the warning I knew that was the problem. The aircraft also had to warm a bit but I did not get or could not see any warming needed warning on the Litchi app. Either way, she flew today for a little while, just a test flight and all was good
THANKS ALL!