HI.
Im one of those you did keep almost until the end on 1.1.9fw + app1.1.0 (and very happy with it).
Finally, i did the 1.4 update, with success with the Microsd, follow by a IMU calibration after cool down a little the P3A.
After, using a pen, update the RC (300A) with 1.3.2. firmware, with success and only did take about 3 minutes the update.
First at all, i must say everything flys well, even the POI, except.....
- I Notice on the first fly, that the P3A when pushing only Right stick forward, the P3A instead of making a perfect line, starts drifting a little to the left.......very little and not visible sometimes....
I thought, maybe im nervous because of update, and did touch a little right the joystick...and im not using P-Mode.
Yesterday, with a little battery charge, i fly a little and notice on the ground the app asking for "Warming" the device....on 1.1.9, never happen. It did it on a few seconds...
As always, also, no issues....and on the air.....on the video i notice a very subtil fly to the right...almost impossible to see...
This morning, i put the P3 and battery outside my house for 30 minutes to cool. I did use a tool for measure the floor and did use the same place, the first time i buy the P3, for IMU calibration, and for the first time, gimball calibration. This time i use my Tablet with good "old" 1.1.0 app. Also forget to insert a microsd on the P3, (important for IMU)?
After, new fly.....the same problem:
Sometimes i notice a small "inclination" for the right....very subtil. This time i did use the 2 second pair of propellers, still virgins.
Also, there was no wind on the morning. Perfect weather conditions on early morning.
Im very perfectionist person.....and sometimes i start to thing that i see things that don`t exist...
For help, i put here a screen of data for first IMU calibration data, before try 2 IMU calibration this morning:
The data from calibration IMU of this morning isn`t very different of this image....
Resuming:
- Going forward....sometimes i feel isn`t going 100% on a straight line.
- Looking to the image, i have that bad feeling something isn`t ok anymore, like on 1.1.9fw. Seems camera is a milimeter to the left, also. No horizontal problems that i notice.
Even 1meter of the floor, exactly at my front and aligned with my vision, pushing forward 6 meters, than 6 meters back, it starts drifting a little to my left...(no wind also).
Im i getting crazy? Sorry my bad English, all help is appreciated and sorry the long testament...
Im one of those you did keep almost until the end on 1.1.9fw + app1.1.0 (and very happy with it).
Finally, i did the 1.4 update, with success with the Microsd, follow by a IMU calibration after cool down a little the P3A.
After, using a pen, update the RC (300A) with 1.3.2. firmware, with success and only did take about 3 minutes the update.
First at all, i must say everything flys well, even the POI, except.....
- I Notice on the first fly, that the P3A when pushing only Right stick forward, the P3A instead of making a perfect line, starts drifting a little to the left.......very little and not visible sometimes....
I thought, maybe im nervous because of update, and did touch a little right the joystick...and im not using P-Mode.
Yesterday, with a little battery charge, i fly a little and notice on the ground the app asking for "Warming" the device....on 1.1.9, never happen. It did it on a few seconds...
As always, also, no issues....and on the air.....on the video i notice a very subtil fly to the right...almost impossible to see...
This morning, i put the P3 and battery outside my house for 30 minutes to cool. I did use a tool for measure the floor and did use the same place, the first time i buy the P3, for IMU calibration, and for the first time, gimball calibration. This time i use my Tablet with good "old" 1.1.0 app. Also forget to insert a microsd on the P3, (important for IMU)?
After, new fly.....the same problem:
Sometimes i notice a small "inclination" for the right....very subtil. This time i did use the 2 second pair of propellers, still virgins.
Also, there was no wind on the morning. Perfect weather conditions on early morning.
Im very perfectionist person.....and sometimes i start to thing that i see things that don`t exist...
For help, i put here a screen of data for first IMU calibration data, before try 2 IMU calibration this morning:
The data from calibration IMU of this morning isn`t very different of this image....
Resuming:
- Going forward....sometimes i feel isn`t going 100% on a straight line.
- Looking to the image, i have that bad feeling something isn`t ok anymore, like on 1.1.9fw. Seems camera is a milimeter to the left, also. No horizontal problems that i notice.
Even 1meter of the floor, exactly at my front and aligned with my vision, pushing forward 6 meters, than 6 meters back, it starts drifting a little to my left...(no wind also).
Im i getting crazy? Sorry my bad English, all help is appreciated and sorry the long testament...
