Morning guys,
Firstly, flying this morning (local field where I’ve flown before) and had a few weak / lost signal occurrences at about 400m away. As the fields grass was quite long I took off from a tennis court surrounded by a metal fence (about 3m height) Signal returned quite quickly and I flew back. Switched to Vertical Studio as I wanted to test “Rails” flew out to same spot and had no issues. Switched back to “GO’ Moved out of the tennis court and tried again and lost signal completely which initiated RTH. Bird flew home and hovered above home point at which point a red button appeared saying cancel landing (or similar) not seen that before but assume it’s for you to take control to land manually, correct??
Therefore would the fence which wasn’t really LOS as I was quite high interfere with the signal? But then didn’t seem to interfere with the VS app. I was keeping an eye on the signal on VS and it was fluctuating down to 90% but mainly stayed around 98%.
Secondly, GO app kept changing between video and photo modes. Every few seconds it would flick over to photo, then flick back on its own. Any idea?
Thirdly, when I landed after the RTH battery was at about 27% but was showing red. I’ve normally landed before 30% but sure when it has been under 30 it was only yellow…When I first took off battery was at 96% had not been used but had been charged a 2 or 3 days prior to this flight.
Appreciated any help, P3A has flown faultlessly prior to this so just a little disconcerting
Dave
Firstly, flying this morning (local field where I’ve flown before) and had a few weak / lost signal occurrences at about 400m away. As the fields grass was quite long I took off from a tennis court surrounded by a metal fence (about 3m height) Signal returned quite quickly and I flew back. Switched to Vertical Studio as I wanted to test “Rails” flew out to same spot and had no issues. Switched back to “GO’ Moved out of the tennis court and tried again and lost signal completely which initiated RTH. Bird flew home and hovered above home point at which point a red button appeared saying cancel landing (or similar) not seen that before but assume it’s for you to take control to land manually, correct??
Therefore would the fence which wasn’t really LOS as I was quite high interfere with the signal? But then didn’t seem to interfere with the VS app. I was keeping an eye on the signal on VS and it was fluctuating down to 90% but mainly stayed around 98%.
Secondly, GO app kept changing between video and photo modes. Every few seconds it would flick over to photo, then flick back on its own. Any idea?
Thirdly, when I landed after the RTH battery was at about 27% but was showing red. I’ve normally landed before 30% but sure when it has been under 30 it was only yellow…When I first took off battery was at 96% had not been used but had been charged a 2 or 3 days prior to this flight.
Appreciated any help, P3A has flown faultlessly prior to this so just a little disconcerting

Dave