- Joined
- Aug 10, 2016
- Messages
- 5
- Reaction score
- 0
- Age
- 42
Hi all,
so at a wedding a few days ago, I was called away from my drone to take some pictures with the bride and groom. I told my nephew he could fly it for a few minutes, so instead of helping him myself, I asked my wife to help him. About 30 seconds after walking away, I heard leaves being ripped apart and saw my drone flip away from the tree, then back into the tree before doing a violent nose dive to ground, where it flopped around the ground for a few seconds. My wife had to pull the battery to get it to stop flopping around on the ground. I ran to my drone to review the damages, and the vibration absorbing bracket is broken, and the wires to the camera have been ripped out. I have sent pictures of the damages. I have ordered the bracket and the drop pins.
If someone could please take a look and let me know what parts I will need to order, other than the drop pins and the mounting bracket? Any advice (besides "dont let your wife and a 9 year old play with your drone") and/or direction as far as getting it fixed would be greatly appreciated. I am not really sure about how to go about re-wiring the camera to the aircraft. Do I need to order some kind of wiring for the camera, or can I just put the existing wires back into the harness?Please let know what I am missing, if anything.
Thank you in advance!
Erik
so at a wedding a few days ago, I was called away from my drone to take some pictures with the bride and groom. I told my nephew he could fly it for a few minutes, so instead of helping him myself, I asked my wife to help him. About 30 seconds after walking away, I heard leaves being ripped apart and saw my drone flip away from the tree, then back into the tree before doing a violent nose dive to ground, where it flopped around the ground for a few seconds. My wife had to pull the battery to get it to stop flopping around on the ground. I ran to my drone to review the damages, and the vibration absorbing bracket is broken, and the wires to the camera have been ripped out. I have sent pictures of the damages. I have ordered the bracket and the drop pins.
If someone could please take a look and let me know what parts I will need to order, other than the drop pins and the mounting bracket? Any advice (besides "dont let your wife and a 9 year old play with your drone") and/or direction as far as getting it fixed would be greatly appreciated. I am not really sure about how to go about re-wiring the camera to the aircraft. Do I need to order some kind of wiring for the camera, or can I just put the existing wires back into the harness?Please let know what I am missing, if anything.
Thank you in advance!
Erik