Just because I'm not seeing it written down somewhere...I have to assume that since this is a DJI sold modification, that the warranty isn't affected after a self-install?
Phantom 3 rc HDMI output board now in store
- Thread starter Michael620
- Start date
I'm hoping all the hype about HeadPlay proves to be true. I have one on order and will be using on my P3 as soon both the adapter and goggles arrive.
I also ordered the HP's after trying them out with a fellow flyer's Inspire.
Despite the bulky look they were very light. I found the viewing effect not as "immersive" as my FPV goggles but still much more pleasing than my iPad mini 3 even with a sun shield and anti glare screen. Since my interest in the P3 tends more towards long-ish range FPV flight the HP's seem like an excellent alternative to the current crop of HD goggles.
As an added benefit the HP's have a built in 5.8gHz VRx.
:h
Despite the bulky look they were very light. I found the viewing effect not as "immersive" as my FPV goggles but still much more pleasing than my iPad mini 3 even with a sun shield and anti glare screen. Since my interest in the P3 tends more towards long-ish range FPV flight the HP's seem like an excellent alternative to the current crop of HD goggles.
As an added benefit the HP's have a built in 5.8gHz VRx.
:h
Definitely interested in this now that I see how crappy the tablets hold up in the heat. Makes me miss the SD video on my BP (sad to say)
This is an approved add-on, of course it will keep warranty intact.
for a mini how to please go here:
http://www.phantompilots.com/threads/mini-howto-dji-phantom-3-hdmi-upgrade-board.43245/
I don't believe this will work as this was the problem with the old P2 stock setup. iPads especially will not accept video input although there are some Androids that will do so. I would dig but I'm not sure its worth the effort
$99 is about what it is worth to me. People were saying as much as $199 on rcgroups...
But I think you're limited to only video out with this? You don't see OSD on your Goggles/Headplays, right? You won't see your battery status, gps status, nothing... Or do you?
But I think you're limited to only video out with this? You don't see OSD on your Goggles/Headplays, right? You won't see your battery status, gps status, nothing... Or do you?
No, it was stated it was going to be less than $150 by the Project Manager. Well it is less than $150
Pretty much the same tx except inspire tx has the HDMI board already. Also has the 5.8ghz radio in it for the dual tx function of the inspire...Does nothing for P3.. I've seen them go on eBay for <450. Meanwhile I could sell my phantom tx for 350ish.
Maybe I could figure out how to utilize the landing gear toggle to do something remotely too...hmmmm.
On the Inspire you can toggle OSD on and off. I am assuming it will be the same for the P3.
Yes, you will have the same options as the inspire.
Dual output ON or OFF, OSD via HDMI ON or OFF.
Dual output ON or OFF, OSD via HDMI ON or OFF.
Cool. I guess it should be noted that the OSD from the HDMI out is basic. It does not look like the data from app with the map and all that. Found a pic.
Still better than laggy or frozen video. Don't see any other option in hot summer months/tropical locales.
These should work...
http://www.amazon.com/s/?ie=UTF8&ke...hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_ei55hy0wz_b
http://www.amazon.com/s/?ie=UTF8&ke...hvptwo=&hvqmt=b&hvdev=c&ref=pd_sl_ei55hy0wz_b
I'm hoping all the hype about HeadPlay proves to be true. I have one on order and will be using on my P3 as soon both the adapter and goggles arrive.
Got a link?
