P3S inside
- Thread starter M.Tigelaar
- Start date
Wow. That was really cool to see! I've always wondered what they look like inside. I wonder how much the pro and advanced differ from the standard. Thanks for sharing
Inside the P3S Drone:
Youtube Timestamp: 8:25 <-- the 5.8ghz dual antenna RC Receiver Module
Youtube Timestamp: 9:23 <-- the 2.4ghz single antenna WiFi
Youtube Timestamp: 9:23 <-- the 2.4ghz single antenna WiFi
Inside the P3S Controller:
nothing reported.. yet. UPDATE: more about the controller here
Last edited:
I had an ESC Status error post crash which motors were impossibly trying to turn while on the ground. The only remedy is board replacement ($399 if P3P, retail price. Some selling around $299 if you get lucky). I suspect the P3S will have this same issue. My suggestion is to shut motors off quick if they cannot turn.
dirkclod
Premium Pilot
Thought I saw 2 ..2.4 antennas in one video inside the battery box
If that's the case I wonder where the other cable hooks to.
Thought I saw 2 ..2.4 antennas starting around 10.03 ? One on each side . I can't tell what that cat is saying while he's pointing at them .
If that's the case I wonder where the other cable hooks to.
There is only one RF cable coming out of the camera base; at least on that end where the wifi radio is located. My guess is the german speaker is describing differences between the P2V+ and P3S.
dirkclod
Premium Pilot
I dono garrock . I only saw the one cable in the camera too but maybe the other one is on the bottom side of the board in the bird.
It would seem to me that it would have to have 2 antenna panels or the signal would just be one-sided .
Now I am only going by what I know from the P2 but it is 2.4 and 5.8 and would seem to be the same . Now this one might be way different cause this http://www.phantompilots.com/threads/phantom-3-standard-antenna-upgrade.51543/page-2#post-496137 I have never been able to do with the P2's I've had .Not saying the guy is telling me wrong as he has one and I don't but I still can't get a grip on that .
Wish I knew german or another YT would come out with just what I wanted to know ! LOL
It would seem to me that it would have to have 2 antenna panels or the signal would just be one-sided .
Now I am only going by what I know from the P2 but it is 2.4 and 5.8 and would seem to be the same . Now this one might be way different cause this http://www.phantompilots.com/threads/phantom-3-standard-antenna-upgrade.51543/page-2#post-496137 I have never been able to do with the P2's I've had .Not saying the guy is telling me wrong as he has one and I don't but I still can't get a grip on that .
Wish I knew german
or another YT would come out with just what I wanted to know ! LOL
Last edited:
Similar threads
