P3 Firmware v1.7.0060

[neven]

ok I just did upgrade and it shows.
app 2.4.2
rc 1.5.70
fw 1.7.60
is this right?

App 2.4.2 will not update RC to 1.5.80


Sent from my iPhone using PhantomPilots mobile app

 

[rmfa]

Am I the only one facing problems zooming the map on DJI GO 2.7.1 and Ipad Mini 4 iOS 9.2.1 ??

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

This is off topic and related to the app. Not the firmware.

 

[chessman]

Just to clarify - the update is only the bird and not the battery..... I don't need to cycle all my batteries?

 

[mandalay]

Just to clarify - the update is only the bird and not the battery..... I don't need to cycle all my batteries?

Not sure but I did it anyway. I put 3 of my batteries in and each time the camera status light did flash once from green to red and back to green.

 

[mandalay]

ok I just did upgrade and it shows.
app 2.4.2
rc 1.5.70
fw 1.7.60
is this right?

RC should be 1.5.80 and FW is 1.7.60 as stated.

 

[Steve Mc Queen]

My P3A refuses to upgrade to Firmware v1.7.0060...I downloades from here (Phantom 3 Advanced - Specs, FAQ, Tutorials, Downloads and DJI GO | DJI)
What am i doing wrong?

 

[mandalay]

My P3A refuses to upgrade to Firmware v1.7.0060...I downloades from here (Phantom 3 Advanced - Specs, FAQ, Tutorials, Downloads and DJI GO | DJI)
What am i doing wrong?

Did you unzip the file downloaded from that link and put it in the root folder of the microSD card? Follow the instructions from here step and step and you'll be able to upgrade your aircraft.

 

[Steve Mc Queen]

wtf...i downloaded 2 times the file and it gave me this

P3S_FW_V01.07.0060 (24mb)
P3X_FW_V01.07.0060 (28mb)

which one is for P3A?This is not the first time i am upgrading my phantom btw

 

[mandalay]

wtf...i downloaded 2 times the file and it gave me this

P3S_FW_V01.07.0060
P3X_FW_V01.07.0060

which one is for P3A?

P3S_FW_V01.07.0060 - P3A

 

[Oso]

wtf...i downloaded 2 times the file and it gave me this

P3S_FW_V01.07.0060
P3X_FW_V01.07.0060

which one is for P3A?

X is for PRO
S is for ADVANCED

Though that "S" caused lots of confusion when the Standard came out.

 

[marzipana]

wtf...i downloaded 2 times the file and it gave me this

P3S_FW_V01.07.0060
P3X_FW_V01.07.0060

which one is for P3A?

P3S_FW_V01.07.0060...that's what the link on the DJI page leads to for the Advanced.

 

[Steve Mc Queen]

I formatted the sd card and tried again....looks good now....thnx guys

 

[AirSpace2016]

Anyone have any negative issues so far with new fw in terms of flight and using programs such as litchi other than 3rd party battery.

How many did an imu and recalibration ?

 

[Mordor]

Its a must after each update.....at least a IMU!

 

[xjmdrone]

For the pros...
I'm on Firmware v1.3.20 should I stay there??

 

[Holrits]

Its a must after each update.....at least a IMU!

Why must you calibrate IMU after Update?
I havent done it last Update and i get no Warming in app either?

 

[CafeRacer]

Because I updated and it doesn't say 1.7 it says 1.6.4+ wondering if that is right. All indications say it is, just wanted to verify.

Yes that is correct, you can check from the DJI Go app to be sure. Tap the controller, tap the bottom left 3 dot button, then hit about. It will show what version it is running. Or just watch the YouTube video.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

Sent from my iPhone using PhantomPilots mobile app

 

[rmfa]

Its a must after each update.....at least a IMU!

No, it's not! I've only had problems when doing an IMU calibration. From what I understand it's already calibrated from the factory and you don't need to do it unless it tells you. Just like the compass.

 

[Jtrjr]

For the pros...
I'm on Firmware v1.3.20 should I stay there??

Xj,

I moved up to 1.4, then to 1.5 so I could get the RC and battery updates. Then I dropped back down to 1.4 on the bird so I could get the advanced flight modes which 1.3 doesn't support. Stayed on DJI Go 2.43 for settings only and stayed on Litchi 2.7.1 for actual flying. I'm using Android, Nvidia Shield and Samsung Tab S2. All is good, been on it now a few months with quite a few flights.

I'm trying to stay away from the Geo stuff and anything on SDK 3 for now. I'm going to wait awhile and see how all of this new stuff pans out for the masses, over the course of some time, before I make any more moves. All just my opinion, of course. YMMV. Good luck!

Jerry

 

[xjmdrone]

Xj,

I moved up to 1.4, then to 1.5 so I could get the RC and battery updates. Then I dropped back down to 1.4 on the bird so I could get the advanced flight modes which 1.3 doesn't support. Stayed on DJI Go 2.43 for settings only and stayed on Litchi 2.7.1 for actual flying. I'm using Android, Nvidia Shield and Samsung Tab S2. All is good, been on it now a few months with quite a few flights.

I'm trying to stay away from the Geo stuff and anything on SDK 3 for now. I'm going to wait awhile and see how all of this new stuff pans out for the masses, over the course of some time, before I make any more moves. All just my opinion, of course. YMMV. Good luck!

Jerry

Thanks, that make totally sense.