Maybe....but adjust your braking in the app.........Not sure why but the P4's for some reason have more issues than any other model....from what I have seen.
msinger
Approved Vendor
- Joined
- Oct 30, 2014
- Messages
- 32,156
- Reaction score
- 10,917
- Location
- Harrisburg, PA (US)
- Website
- phantomhelp.com
You can adjust the sensitivity of the brake in the following section of DJI GO:
To be honest I never alter no settings I have found with the p4 if starts getting unsmooth on start stop I calibrate sticks again,you should be able to do a search and find what factory is set at,,if different then I would change but be ready to reverse in case stopping to slow especially around non open area,I would start at the sticks 
What brake settings are you all using?
I am using standard but I do notice it can throw the gimbal around a bit.
I am using standard but I do notice it can throw the gimbal around a bit.
Last edited:
What do you mean by "throw the gimbal around a bit"?
I posted a video of my p4p2.0. The camera shakes when I brake, no matter how slow/fast I fly and no matter what the brake settings are. Never experienced that issue with my p4adv. Had to send it to DJI for repair. They sent it back just as faulty and now they no longer respond to my emails to DJI support.
I get that too unfortunately I came from a Mavic Pro, which was rock solid in the air (but the camera was crap), to the phantom 4 Pro 2 (but the gimbal is crap). Best thing to do is fly it when there is no wind and make all your motions smooth and buttery.
- Joined
- Jun 8, 2016
- Messages
- 619
- Reaction score
- 168
You also need to adjust the Gimbal's pitch. The horizon is tilted down a few degrees on the right.
Bud
Bud
- Joined
- Aug 7, 2016
- Messages
- 1,612
- Reaction score
- 973
Yes, I was a bit surprized about that braking when I switched from P3A to P4P.
But it has a reason of course. The P4P is a bit faster than P3.. Without that braking maneuver when you left the stick the drone could make a pretty long distance until it stops. At full speed that might be near 50m and so it can hit the object you intend to stop in front of it. That's normal braking. But when you slow the drone easy and gently it will not brake at all! If your drone do that even then this is not normal! Then adjusting the 'brakes' is reasonable.
But it has a reason of course. The P4P is a bit faster than P3.. Without that braking maneuver when you left the stick the drone could make a pretty long distance until it stops. At full speed that might be near 50m and so it can hit the object you intend to stop in front of it. That's normal braking. But when you slow the drone easy and gently it will not brake at all! If your drone do that even then this is not normal! Then adjusting the 'brakes' is reasonable.
Similar threads
