Magnetic lock on yaw arm

[Ghost Rider]

Does anyone know how to remove the motor from the yaw arm and gimble arm? Is that magnetic lock pressed in there?

 

[LamboH]

should be able to pull apart from the other side just with bare hands.

It separates and connects back together pretty solid but I was still able to separate by pulling apart the two


Should end up looking like this

 

[Ghost Rider]

Dude, I can't get mine to budge and I don't want to break anything.

 

[LamboH]

Try holding like this and firmly grabbing the camera body with other hand
Or very carefully pry open with plastic pry tools or super very carefully with small flat head

 

[Ghost Rider]

Still no luck. I get what you're explaining but I get no budge. I'll keep truckin' with it.

 

[Ghost Rider]

I just cut the roll arm and left the magnets together. Thanks for the help.

 

[mdowney58]

If you were (or are) trying to get Part A out of Part B, I think it attaches to Part B with screws. I might be wrong though.
But if I'm right, you have to remove the rear cover to access them.

Sent from my SM-N910V using Tapatalk

 

[Zeprider]

It seems like it won't budge but it requires a bit more force than you would imagine. Just make sure you pull it straight off.

Sent via Galaxy Note 4 & Tapatalk