IMU Calibration failure - 22

Marcmorrow · Dec 2, 2016

I cannot complete the IMU calibration, I keep getting the same error.

Can anybody advise?

Sam Fingold · Dec 2, 2016

I don't even get past the second dot

smf72 · Dec 2, 2016

has anyone calibrated the imu

DJIRICH · Dec 2, 2016

Not managed to get mine to work either, errors on both IMU 1&2 with P4P

IMU 1: Calibration Failed. Result Error. (Error Code -22)
IMU 2: Calibration Failed. Result Error. (Error Code -22)

Marcmorrow · Dec 2, 2016

now I am being told that its because I am not using a support device

richr · Dec 2, 2016

I just completed one. I had to carefully follow the images but it worked. I'm using an Nvidia Shield tablet, but I don't know if that matters.

Marcmorrow · Dec 2, 2016

richr said:
I just completed one. I had to carefully follow the images but it worked. I'm using an Nvidia Shield tablet, but I don't know if that matters.

did you wait until the lights stopped flashing before moving it?

richr · Dec 2, 2016

Marcmorrow said:
did you wait until the lights stopped flashing before moving it?

Didn't pay that much attention to the lights. I followed the app very carefully. The first step with the P4P standing normally on its legs took about 60 seconds. Once the app started asking me to rotate it, the steps were pretty quick.

I am on the updated firmware I didn't try with the original firmware.

Marcmorrow · Dec 2, 2016

richr said:
Didn't pay that much attention to the lights. I followed the app very carefully. The first step with the P4P standing normally on its legs took about 60 seconds. Once the app started asking me to rotate it, the steps were pretty quick.

I am on the updated firmware I didn't try with the original firmware.

Did you update the firmware via dji go app? Mine tells me that my firmware is up to date

jackiedh · Dec 2, 2016

richr said:
Didn't pay that much attention to the lights. I followed the app very carefully. The first step with the P4P standing normally on its legs took about 60 seconds. Once the app started asking me to rotate it, the steps were pretty quick.

I am on the updated firmware I didn't try with the original firmware.

Are there any tutorials on how to calibrate the IMU on the new P4 Pro??

As this appears to be a whole new way to calibrate The IMU...

Thanks

Jack

richr · Dec 2, 2016

Marcmorrow said:
Did you update the firmware via dji go app? Mine tells me that my firmware is up to date

Yes. Updated yesterday as soon as I got it.

Sent from my Pixel XL using PhantomPilots mobile app

richr · Dec 2, 2016

jackiedh said:
Are there any tutorials on how to calibrate the IMU on the new P4 Pro??

As this appears to be a whole new way to calibrate The IMU...

Thanks

Jack

Not that I have seen. The closest is for the mavic. There are some videos for it that give you the general idea but the P4P tilts differently. Pay close attention to the camera in the app. I suspect that's what is tripping most people up. I also made sure the bird was cold.

Sent from my Pixel XL using PhantomPilots mobile app

jackiedh · Dec 2, 2016

richr said:
Not that I have seen. The closest is for the mavic. There are some videos for it that give you the general idea but the P4P tilts differently. Pay close attention to the camera in the app. I suspect that's what is tripping most people up. I also made sure the bird was cold.

Sent from my Pixel XL using PhantomPilots mobile app

Thanks

Jack

Snowwolf · Dec 2, 2016

I have tried many IMU's calibrations about 25 and none have made both pass, always both fail or just one of them, I am doing it exactly as the instructions on the the tutorial that is presented to you when you click the calibrate button, have also done a very cold minus 4 again with no luck.

Snowwolf · Dec 2, 2016

Not sure if this will work, me doing IMU on P4P

jackiedh · Dec 2, 2016

Snowwolf said:
Not sure if this will work, me doing IMU on P4P

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.