Gimbal dies after 10 seconds

carty87 · Nov 5, 2015

Hi. My phantom 3 gimbal is not responding. It switches on when i boot the quad, does the POST, after 10 seconds it stops working. I also can't see picture on the Dji App during the time it's on. Any known solutions to this problem?

msinger · Nov 5, 2015

Did you crash?

bbfpv · Nov 5, 2015

try a different SD card.

carty87 · Nov 5, 2015

msinger said:
Did you crash?

No I haven't crashed. It just stopped working.

bbfpv said:
try a different SD card.

There's no SD card in the Drone.

bobmyers · Nov 5, 2015

carty87 said:
No I haven't crashed. It just stopped working.

There's no SD card in the Drone.

That's the problem

carty87 · Nov 5, 2015

bobmyers said:
That's the problem

I've tried with and without card, I doubt that's the problem. No one else has experienced this?

This is what happens

bobmyers · Nov 5, 2015

carty87 said:
I've tried with and without card, I doubt that's the problem. No one else has experienced this?

This is what happens

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

This was happening to mine and reformatting the card resolved it. Also check the About screen in the app and give a list of the FW Versions. The other instance that it happened to me was when I upgraded from 1.1.9 to 1.3.2 on the aircraft and still had 1.1.9 on the controller.

carty87 · Nov 5, 2015

bobmyers said:
This was happening to mine and reformatting the card resolved it. Also check the About screen in the app and give a list of the FW Versions. The other instance that it happened to me was when I upgraded from 1.1.9 to 1.3.2 on the aircraft and still had 1.1.9 on the controller.

Thank you, let me try this fix. I will report back soon.

carty87 · Nov 5, 2015

bobmyers said:
This was happening to mine and reformatting the card resolved it. Also check the About screen in the app and give a list of the FW Versions. The other instance that it happened to me was when I upgraded from 1.1.9 to 1.3.2 on the aircraft and still had 1.1.9 on the controller.

Holy crap it worked! Thanks brother! The card needed formatting! I owe you 50 Beers!

bobmyers · Nov 5, 2015

carty87 said:
Holy crap it worked! Thanks brother! The card needed formatting! I owe you 50 Beers!

Miracles never cease

yellowfin35 · Nov 6, 2015

I am having the same problem - but only after a reboot. You think it is the same thing?

bobmyers · Nov 6, 2015

yellowfin35 said:
I am having the same problem - but only after a reboot. You think it is the same thing?

Try and see-- Doesn't cost anything.

jasonq · Nov 7, 2015

How do you format a new SD card?

bobmyers · Nov 7, 2015

You can put it in a USB reader and format it on the computer, or format it in the app on the P#
3

jasonq · Nov 7, 2015

No crash, put a new SD card in and formatted it. Drone flys, but I have no camera?? Any thoughts?

jasonq · Nov 7, 2015

I'm running the current version 1.4 or something. Should I go back to the 1.3?

bobmyers · Nov 8, 2015

jasonq said:
I'm running the current version 1.4 or something. Should I go back to the 1.3?

Does the Camera commands show up on the device-- IOW are they operable. If so, format the SD card in the P3.

jasonq · Nov 8, 2015

No. I have no camera controls, the icons are not lite up. However if you move the camera with your hand, you can see on the screen the little ball move up and down

jasonq · Nov 8, 2015

And it will fly, but I have to use the road map. It's just a black screen with dji in the middle. But all systems are normal including camera. It has me stumped!!

Meta4 · Nov 8, 2015

jasonq said:
And it will fly, but I have to use the road map. It's just a black screen with dji in the middle. But all systems are normal including camera. It has me stumped!!

Try different SD card