Flying in extremely low temperatures.

[Thomas Morrison]

Hi all,

I know this has been talked about ALOT but nothing really has a straight forward conclusive answer.

I know a lot of you fly in a lot colder conditions and after all you can get a lot nicer photos in the frost and snow. In the U.K. This morning where I was it was -4C, cold and foggy. I went for a flight but after 10 minutes gave up and went home as you couldn't really do anything in thick fog.

When I landed the water over the drone was unreal, all over the cameras lens, the gimble etc. I wiped it all dry but can this condensation do any damage to gimble motor etc. When I had landed there was thick ice formed on the props that I had to pick off haha!

I really don't want to wait until summer to fly again!

Sincerely,

Tom


Sent from my iPhone using PhantomPilots

 

[Mark The Droner]

I'm not sure fog can exist at -4C. Sounds like you were straddling 0C

Anyway, there have been many posts from people including myself who have flown in fog. And yes, their ACs are soaking wet when they return. So far, I haven't seen any posts regarding flight problems.

Ice building up on the props would definitely cause problems, I would think.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies

 

[Philltayl]

Yes you do get fog below 0C it's called freezing fog. Ice buildup on the props will bring the P3 down.

 

[Jayfdee]

The ice build up could also due to evaporative cooling, and maybe weird pressure effects around the props.
I live near the Lake district and often have to fly in damp misty weather and so far no problems. I have tried flying straight up to see if I could clear the mist, but usually bottle out before any breakthrough.

 

[CrispyClaret]

Didn't check mine for condensation this morning in the frost but it wasnt foggy either for first time in a few days.
Ours is usually fairly low lying and worth flying above.

To view this content we will need your consent to set third party cookies.
For more detailed information, see our cookies page.

Accept third party cookies