Flat cable replacement for the Vision gimbal
- Thread starter maher
- Start date
This is the only one I have seen.
http://atkdrones.com/products/phantom-2 ... flex-cable
http://atkdrones.com/products/phantom-2 ... flex-cable
mfajma said:
Thanks for the link.
Do you know if that cable will work for the plain Phantom Vision? At 85$/piece plus 50$ shipping, better be safe than sorry...
Maher
The photo in your original post was of the Vision Plus Gimbal which is why the subsequent posts showed replacements for it. It's a flat ribbon cable which as far as DJI is concerned is not a user-replaceable part.
The Phantom Vision has a quite different cable - a three-wire R/C servo cable - that is very cheap and easy to replace. Is that what your friend broke?
The Phantom Vision has a quite different cable - a three-wire R/C servo cable - that is very cheap and easy to replace. Is that what your friend broke?
zenoshrdlu said:
The picture was taken from my friend of his broken gimbal, so it's must be a Phantom Vision Plus. The reseller of his Phantom told him that they're nothing he can do and that he should buy a whole new gimbal/camera apparatus...
I guess that this very overpriced flat cable is probably less expensive!
Thanks,
Maher
I Had the same problem, i was fiddling with the drone and i tore the ribbon cable in the same spot as the picture above.
I bit the bullet and spent the 85$ plus 60$ for shipping. I know its crazy but it was that or buy a new gimbal and camera. \\
anyway long story short. I replaced the cable myself, it was quite easy tbh as you dont need to open everything up just the top plate of the gimbal where the drone wires connect and the back plate of the camera.
im happy to say the fix worked and my drone is back to its old self.
If anyone is trying this and needs some help let me know.
ALI
I bit the bullet and spent the 85$ plus 60$ for shipping. I know its crazy but it was that or buy a new gimbal and camera. \\
anyway long story short. I replaced the cable myself, it was quite easy tbh as you dont need to open everything up just the top plate of the gimbal where the drone wires connect and the back plate of the camera.
im happy to say the fix worked and my drone is back to its old self.
If anyone is trying this and needs some help let me know.
ALI
Is there really any reason for this cable to cost that much? Or is it just another way for someone to screw + owners?
They must make it with gold wires!
They must make it with gold wires!
Your (we are all, really) in luck. DDM now carries the offical DJI replacement ribbon cable. Bought a set yesterday...
http://www.davesmotors.com/DJI-Special-Order-Part-Ribbon-Cable.html
http://www.davesmotors.com/DJI-Special-Order-Part-Ribbon-Cable.html
- Joined
- Apr 13, 2014
- Messages
- 594
- Reaction score
- 98
cmyk22 said:
WTF? Link is bad... DDM page for the cable is down/no longer available!
I have a gimbal with a broken cable sitting in a box waiting for a ribbon cable. Bought a full replacement two months ago, but all I need is the cable for my old gimbal and I can sell it/get some of my $679 back. I don't really want an $85 aftermarket cable.
Maybe DJI told them NOT to sell that item so they can sell the entire device and make mega bucks!DrJoe said:
European users will be happy - at electronicarc.com you can get a set of two Gimbal Ribbon Cable for € 45 plus shipping (normal letter € 8 or other shipment methods). Just found the shop and bought the set. Expecting within 2-5 business days.
Similar threads
