- Joined
- Aug 11, 2017
- Messages
- 289
- Reaction score
- 142
- Age
- 68
Actually mine had me disconnect the controller and use the cable to do the update to the P4P.
Firmware Update 01.05.0300
- Thread starter Gtarman52
- Start date
I had the same experience and wasted heaps of time also. The instructions are not clear. When it says unplug and reconnect, it means unplug from the drone and reconnect into the remote. The update will then finish.
- Joined
- Mar 20, 2016
- Messages
- 440
- Reaction score
- 163
- Age
- 35
I have been fooling with the pano mode. I have made some progress. The wide angle and portrait modes are good. I think with time I can get some great pix. I am having trouble with the circular mode. The drone will take a 360 pix, and when viewed in DJI go 4 from the drone, it is a cool globe. However when I copy that pix and try to look at it on my pc, it looks like the attached photo. I guess I need to find some software that will display the pix as a globe. It is probably obvious that I am not using the correct vocabulary for this issue. I have a learning curve to work through.
Attachments
Kind of a cool picture except for the parking lot in the foreground it's weird
- Joined
- Mar 20, 2016
- Messages
- 440
- Reaction score
- 163
- Age
- 35
I heard that that option was removed after .509 firmware. So there is no forced "smart" RTH that makes the AC automatically rise to RTH height and RTH upon lost connection, in this firmware on iOS?
Another question: Have you noticed any irregularities regarding NFZ/GeoFencing? And 500 m is still the height limit?
Thanks Speedmeister, appreciate it!
Another question: Have you noticed any irregularities regarding NFZ/GeoFencing? And 500 m is still the height limit?
Thanks Speedmeister, appreciate it!
This maybe over my head since I am new to P4P. I started with version 1.4.0703 and upgraded to 1.5.0300. The max height is 500m and max distance is 8000m. I dont know about geo fencing yet but I fly around in my front yard which within class C. As far as rth goes, only tried it under 20 meyers distance and always wants to land when rth initiated. I always thought rth will rise to set altitude and fly syraight home.
- Joined
- Mar 20, 2016
- Messages
- 440
- Reaction score
- 163
- Age
- 35
It won’t rise to RTH height when it is so close to home point (which is a bit weird, what if you were standing next to a lake and initiated RTH and it landed straight in the water?)
I never use RTH on purpose but I have had it happen a few times when I’ve lost connection to AC.
Need to confirm that one can still set it to Hover. Otherwise there is no flying indoors or under obstacles ever again.
Cheers to your new drone. Don’t fly near structures with much metal in GPS mode.
In the P4P manual a RTH , whether it be failsafe , smart or low battery mode, if triggered within 20m of the homepoint will result in the AC landing.
If the RTH is triggered while more than 20m away from the home point it will ascend to the RTH height set and then come all the way back to the home point
If the RTH is triggered while more than 20m away from the home point it will ascend to the RTH height set and then come all the way back to the home point
Hover would be the choice when flying indoors. Most lost connection due to bird out of LOS, and if set to hover then you have to hurry and regain LOS to get control of AC or it will land when it runs out of power.
[QUOTE=". I guess I need to find some software that will display the pix as a globe. .[/QUOTE]
I opened your photo in FSPViewer and it displayed perfectly.
I opened your photo in FSPViewer and it displayed perfectly.
Is this where the pano feature is supposed to be?
I'm on android app 4.1.18 r/c 01.04.01.00
You need 4.1.20 or 4.1.22
I saw someone here posted that the pano is now available in android. Did you check for the updated app?
Similar threads
