Does anyone have DJI Pilot app version 1.1.0? Please help!

III% Streve · Sep 1, 2015

Yes, the older version app will work fine with newer FW

StevenQX · Sep 1, 2015

III% Streve said:
Yes, the older version app will work fine with newer FW

I'll try asap thanks

StevenQX · Sep 1, 2015

III% Streve said:
Yes, the older version app will work fine with newer FW

One question, do you use it? And do you think it performs better than the newer ones?

Mordor · Sep 1, 2015

I did have a short experience with last app version.....crash....maybe did something wrong.

Returned to 1.1.0., no problems.

III% Streve · Sep 1, 2015

I use unreleased app and FW, but have had no trouble with any released apps or FW

Fireadaptmike · Sep 2, 2015

P3A running DJI PILOT app. version 1.0.7. no signal from video downlink. Firware says latest firmware installed. In the list of firmwares it says, centerboard firmware unknown...

Fireadaptmike · Sep 2, 2015

Fireadaptmike said:
P3A running DJI PILOT app. version 1.0.7. no signal from video downlink. Firware says latest firmware installed. In the list of firmwares it says, centerboard firmware unknown...

Ive been without a video downlink for two weeks. since the DJI GO app auto updated...

III% Streve · Sep 2, 2015

Fireadaptmike said:
Ive been without a video downlink for two weeks. since the DJI GO app auto updated...

Did you update the FW?

Sent from my SM-G920P using Tapatalk

Fireadaptmike · Sep 2, 2015

III% Streve said:
Did you update the FW?

Sent from my SM-G920P using Tapatalk

Streve..

I used the DJIGO app out of the box... it has upgraded the R/C to 2.1.0. ... I havent been able to get the P3 to properly upgrade, when I spool up... I get no picture on my Ipad mini2, status message says "a/c, camera, and battery require upgrade". So I downloaded the DJI PILOT app from this thread. Still no video... the "overall Status" says "latest firmware", but when I open the firmware section all is good except "centerboard firmware unknown"? I dunno.

Thank you Streve

III% Streve · Sep 2, 2015

Fireadaptmike said:
Streve..

I used the DJIGO app out of the box... it has upgraded the R/C to 2.1.0. ... I havent been able to get the P3 to properly upgrade, when I spool up... I get no picture on my Ipad mini2, status message says "a/c, camera, and battery require upgrade". So I downloaded the DJI PILOT app from this thread. Still no video... the "overall Status" says "latest firmware", but when I open the firmware section all is good except "centerboard firmware unknown"? I dunno.

Thank you Streve

It sounds like you definitely need to update the FW in the P3. Start with formatting the SD card with the GO app. Then move the card to your computer and copy the FW to the card... the .BIN file. Use the latest FW available. It wouldn't hurt to re-download it! Then toss the card back in the P3 and power on. Let it sit for 20+ minutes... till the green light on the front of the gimble turns solid green. Then paste the log file here when its done.

Fireadaptmike · Sep 2, 2015

Thank you for your time Streve... I just purchased a new sd card and will try again...

III% Streve · Sep 2, 2015

It seems to help when having issues to format IN the P3 rather than a computer. No idea why.. there is no logic to it. But its helped some people. Good luck

Fireadaptmike · Sep 2, 2015

III% Streve said:
It sounds like you definitely need to update the FW in the P3. Start with formatting the SD card with the GO app. Then move the card to your computer and copy the FW to the card... the .BIN file. Use the latest FW available. It wouldn't hurt to re-download it! Then toss the card back in the P3 and power on. Let it sit for 20+ minutes... till the green light on the front of the gimble turns solid green. Then paste the log file here when its done.

To this point, I have not been able to access any "log files".

Fireadaptmike · Sep 2, 2015

III% Streve said:
It seems to help when having issues to format IN the P3 rather than a computer. No idea why.. there is no logic to it. But its helped some people. Good luck

Thank you...ive done as you asked, and the a/c is spooled up
Fast blinking yellow main lights, audible da-dada and gamble light is intermittent green w/ about 10sec. intervals

III% Streve · Sep 2, 2015

Fireadaptmike said:
To this point, I have not been able to access any "log files".

There should be a .txt file created on the sdcard after the update starts. Named something like "P3X_FW_RESULT_AB"

III% Streve · Sep 2, 2015

Fireadaptmike said:
Thank you...ive done as you asked, and the a/c is spooled up
Fast blinking yellow main lights, audible da-dada and gamble light is intermittent green w/ about 10sec. intervals

gimble light is green, or green/red alternating?

Fireadaptmike · Sep 2, 2015

Green only, blink 5-10 times followed by audible da-dada, let's flashing quick yellow

Fireadaptmike · Sep 2, 2015

No text file... Haven't seen it once

stilz · Nov 13, 2015

Fireadaptmike said:
No text file... Haven't seen it once

It appears we have the same issue here.. My copter has not updated and i've never seen any .txt file as has been said. Did you manage to sort your issue out.