J jeffscra Joined Feb 19, 2014 Messages 23 Reaction score 0 Aug 2, 2015 #1 When I fire up my Phantom 2 vision on the ground it says its at 46 ft. Shouldn't it read 0 or 1 or 2 or something close to the ground? Thanks, Jeff
When I fire up my Phantom 2 vision on the ground it says its at 46 ft. Shouldn't it read 0 or 1 or 2 or something close to the ground? Thanks, Jeff
noiseboy72 Joined Jul 13, 2014 Messages 575 Reaction score 17 Age 52 Location Lincs, UK Aug 2, 2015 #2 Yes, it should. Suggest you do a full IMU calibration to start with and see if it cures the error.
J jeffscra Joined Feb 19, 2014 Messages 23 Reaction score 0 Aug 2, 2015 #3 Thank you....I will run that and then take it out and fly it and see what i get. Too windy here today though.
Thank you....I will run that and then take it out and fly it and see what i get. Too windy here today though.
J jeffscra Joined Feb 19, 2014 Messages 23 Reaction score 0 Aug 2, 2015 #4 still says i'm at 42ft after calibration. Also I have one of the original flytrex's installed and that data is all over the place too. Stating I have flown on my last flight almost 450 ft up when I never went above 50 ft.
still says i'm at 42ft after calibration. Also I have one of the original flytrex's installed and that data is all over the place too. Stating I have flown on my last flight almost 450 ft up when I never went above 50 ft.
J jeffscra Joined Feb 19, 2014 Messages 23 Reaction score 0 Aug 2, 2015 #5 That plus the compass calibration seems to have worked! Thank you
Timtro Joined Nov 28, 2013 Messages 235 Reaction score 45 Location Florida Sep 6, 2015 #6 MSL or AGL? Not the same unless you're at sea.