camera

I recently got a phantom from a friend. But, all of the camera settings say NA across the board and i cant adjust them. It flys fine but I can't see outside it just goes white but looks perfect inside. I also tried updating, through a pc, but after the download stage, it failed. Please let...

hi guys, I flew my drone today, it was cold around 32F (0C) and I had been flying for around 5 mins, I did warm mothers up etc before hand. flight was going well, until I tried going high. I was probably at around 900ft which I know is too high before anyone comments. anyway I noticed my camera...

Hey Everybody, So I have read several posts about how to take night shots (I have a P3P) and I went out tonight, all excited and when I came back to view my photos, all I could see was blackness with a couple of street lights here and there. I have ISO set for 100, exposure time 2S (also tried...

SOLD

After few evening flying, I think this one (Phantom 3 SE) has a very noisy camera... I used ISO 100-200, but seems to be worse than the other Phantom 3 models... Any ideas, or experience?

Got a used fc40 on CL but the camera is wrecked. Anybody have one laying around to spare?

I recently bought a used phantom 4, and after looking at the video I noticed that there are black verticle stripes running through the video. I did some research and reset all my camera settings and updated the drone, but the problem persisted. I turned over exposure warning off and the problem...

Ok so i was flying my p3 minding my own business when the ground jumped up and hit me so it broke some things which r all better now except my camera dont move i got feed but it just beeps HELP

i hit a tree with my P4 and now my camera will only stay in a downward position twitching every few seconds. I still have video feed. externally the gimble itself seems to be in good shape, no cracks. i think it may be the gimble roll motor that needs to be replaced? any insight would be...

My phantom 3 standard works, including the video - however; the camera doesn't work properly. It says there is an obstruction and the camera keeps bouncing around erratically (and when I say erratically it moves a lot and fast in all directions). Could this be that it needs a new cable (i know...

I noticed this weird glow / glare in my footage, happens in almost all my footage since the beginning. It's not the ND filters, same happens with the stock protective cap. I will try to see if the same happens without the protective cap. Is like if there's a problem to the sensor or a...

WITHDRAWN - FOUND ONE The title says it all. Thanks for any help.

I've already read significant discussion on this group about upgrading the P3A by using a "4k cam and gimbal and upgrade the P3A's firmware to P3Ps." However, I'm somewhat discomboberated as to the terminology being used. So, please allow me to ask these questions (I abhor wasting good...

Selling a used P3A Camera and Gimbal. The camera works great. No issues and lense has no scatches. Asking $185 shipped to Continental US. Will ship overseas for additional shipping. Also selling the controller, P3A/P shell with motors and vision pos. system. Shelling is in good shape.

Was wondering if anyone else is having trouble saving to Camera Profiles. Especially Renaming 1 of the 4 to something else. There seems to be some bugs with that portion of DJI GO 4. Also noticed something when fooling around trying to save them, the Gimbal starts to drift left or right...

Do I charge the gimbal/camera? It has a micro usb port on it, but I'm not sure what it's for? Does the gimbal/camera get power from the battery? Thanks!

I got a used Phantom 3 Standard from a store here in COL, it came just fine -- I guess -- camera looked fine, video and pics, I decided to start, read the manual, charged everything up, installed props, connected to the drone to test, but I couldn't resist flying in doors. bump. I could never...

Any one ever get camera issues like this on phantom 4? I need to know what part of the camera is broken ... so maybe i can find the part and fix it my self ... I ask for help in P4 service center ... and they said all of the gimbal need to be replaced ... it cost about 450 - 500 usd ... Sorry...

I was out the other day and had an interesting issue. As I got things fired up and ready to go, I saw the camera do its little dance upon startup, I got the "Safe to Fly" message, but no image from the camera. Shut everything down and restarted. Pretty much the same thing. Then, I shut down...

My son crashed his P3. The grey ribbon cable for the camera survived, but there are two additional single-lead cables with a connector that broke. See picture for an example. Is it possible to buy these replacement cables somewhere? Or do I have to buy parts - connector, wire, etc. - and...