firmware

I'm trying to update the firmware on my Phantom 3 Pro and it's acting weird. When powered on with the sd card it beeps DD, DD, DD with a solid green light on the gimbal for about 30 seconds. Then it turns into a fast D, D, D, D beeping with red and green flashing light on gimbal for about 2...

The AC connects to the RC and I can takeoff/land/fly/move gimbal/etc. but it tells me that there is "no image transmission signal" (and obviously I don't see a live camera feed). Phantom 3 Professional App Version 3.1.68 Aircraft Version 1.11.20 Remote controller Version 1.9.2 iPhone iOS Version...

DJI provides firmware updates on a regular basis to improve the functionality, reliability, and user experience of its devices. If you’ve recently purchased a new DJI drone, you should be aware that the manufacturer highly advises updating firmware as soon as possible. When a new firmware update...

Hello everyone, I have a Phantom 4 Pro, and a couple months ago I started noticing this weird jello effect on my footage. The gimbal had vibrations which caused the video to look wobbly. So I sent it to a repair shop which claimed to fix it, but did literally nothing. I sent the drone a couple...

I have a P4 standard with a GL300B controller. I've tried to update the drone on DJI Assistant 2 and it fails to accept the either of the two available updates showing in queue. I bought my P4 used and it didn't come with the OTG cable so PC is the only option I have currently to update. I've...

I messed up and flashed a broken boot.img to the remote after unlocking the bootloader (I tried patching it with magisk), and now I've soft bricked it and it won't boot. I can get it to boot into recovery mode by holding down the button on the screen while turning on the remote, but it's a very...

If you look through this, and other Phantom 3 forums, what is the most common complaint / post calling for help? HINT: "My drone was working fine, I have just done a firmware update and now my drone won't connect to my RC - I get an ESC error - I can't see my camera view etc etc". In my humble...

I have been trying all day to get my drone firmware and stuff set up im supposed to deliver it to a fellow tomorrow. the controller light blinks red and beeps insanely and ive tried all day to update drone firmware to the latest All-in-One firmware version updated tov1.11.20.2.Remote...

I’m new to the P4P world, and purchased a low-use pre-owned unit with lots of extras. I know very little about these awesome drones, but am becoming familiar slowly. Can’t wait to get to a level of confidence where I can let the grandkids assume the controls and know enough to jump in when...

Dear Phantom Pilots, Help needed! I try to update my Phantom 3 pro. It fails as following: - I am using last firmware version P3X_FW_V01.11.0020.bin on micor SD - I start the drone to update, the normal process starts - but after 5 minutes of regular normal bip-bip-bip, it turns into...

Whats happening yall, having some issues. I have a P4P V1 that I fly regularly without issue. Since the new GeoFencing update, my drone will not take off. It says "cannot take off- in restricted airspace, must obtain authorization." I have up-to-date firmware, apps and everything. I know the...

P4PV2 - Purchased July 2018 Im having issues with my bird and a lot of people are having the same or similar issues from what ive seen. And it seems some peoples problems have gone after updating. Not mine though... Unfortunately i didn't see the issues until 2.5 months after purchase, because...

Hello Its simple... IF IT AINT BROKE DONT FIX IT. And ironically... ITS NOW BROKE, SO I GOTTA FIX IT. Looking for a copy of RC firmware V01.00.1000. Would be grateful if you had a copy. Please dropbox it too. DJI - Google Drive Thanks

Full disclosure - I crashed the Phantom pretty hard a few months ago. So I replaced the casing (yes it was a lot of tedious work). Put it all back together, and everything seemed fine. Everything connected. I could see the camera view in the DJI Go software on the controller. All was awesome. I...

Hi all, I can confirm/reconfirm that the modification of the flight parameters in firmware 1.09.0200 are possible. I am flying long missions using Litchi for over a year now and what I was mostly interested in was the removal of auto-landing on low battery. Instructions for how to are...

Just wanna hear all your thoughts to be honest. its pretty obvious that DJI have forgotten about the phantom series of drones, even though id say there still one of the best drones they produce, maybe not as portable as the mavics but I still love mine. I just want them to give them a little...

Hello guys, I have a phantom 4 pro with a controller that needs to be replaced due to faulty battery. Mean while I have a number of PH3Pro controllers laying around and I was wondering if someone can walk Mr through the process of linking to my Phantom 4 pro? What I tried: I downgraded a PH3Pro...

Owned Phantom 3 pro since inception. All of a sudden, about 3-4 weeks ago, my dji go app does not recognize my camera. Flew and photographed the day before without any issue ...next day, no camera on iPhone 6 (which I have always used with remote). Everything else works ...I can even...

Hi All YouTube Video to the issue at hand: - When connecting the DJI Racing goggles to the pro + controller, booting up the controller, connecting the P4P drone, Making sure i'm signed in to DJI Go, flight is restricted to 30m and 50m respectively and I cannot control any of the camera...

Phantom 3 Pro Good morning, I get in touch with you because I do not know what to do anymore. I tell you: the drone fell, not of a high altitude, if a couple of pieces related to the gimbal came out, that I could recover and reassemble, after that, I was able to fly 2 or 3 more times until it...