Recent content by vislaw

The Pix4D app for the P3 and Inspire will be out very soon. The beta looks very promising.

This technology has really revolutionized our work in forensic visualization. While the 3D output has been extraordinarily valuable, the high resolution ortho-imagery has been even more important in this industry. We use both a FARO terrestrial scanner and drone-based mapping. The latter has...

Those interested in the new EPSON Moverio glasses as FPV for the VISION quads can read my review here: http://visual-aerials.com/epson-moverio-bt-200.html The glasses are currently only available from Prelaunch...

For the past week I've been flying a Vision + and an original Vision with the EPSON BT-200 and I find them far superior to using a smart phone to monitor the camera/telemetry app. I've posted a review http://visual-aerials.com/espon-moverio-bt0-200.html. Basically, these glasses operate as a HUD...

Thanks for the responses guys. The yellow flashes in ATT mode are different than the quick double flashes I experienced. Fortunately, I figured out the problem. You see, I had removed the CANBus connector and put it inside the shell so I could put the 24GHz datalink and the iOSD mini inside...

I have a Phantom 2 that I updated to Version 3 of the Assistant. It wouldn't spool up so I calibrated my sticks and did the Advanced Calibration under TOOLS for good measure. I then did the compass calibration dance and while it starts out yellow and switches to green after the first rotation...

Hi DYRAZA, ... I tried to respond to your PM but I get a message saying I am unable to post PMs (apparently because I am too new a member and I haven't participated enough). I had to install the Naza PMUv2 and Zenmuse controller board and then added a Spektrum receiver and DX8 radio so I can...

Hi all. I'm new to this forum but I received a PM from a member and I found that I couldn't reply to him because apparently there is a requirement that you participate in discussions before you are allowed to send PMs. So I figured I should post in relevant threads and will start with this one...

I hacked the Zenmuse onto my Vision but it required adding the controller board, a PMUv2 and a Spektrum transmitter/receiver to get everything to work. I get 15 minutes flight with 20% battery left. Given that I had to gut the Vision to do this it isn't really a practical mod. The best solution...