Recent content by tribar

The Phantom 4 Pro v2 has waypoint capabilites in the DJI GO 4 app, and yes, you can take either video or photos at waypoints. Search YouTube for "dji phantom 4 pro waypoints tutorial" or you can buy and intstall "Litchi" if you want to create waypoint missions from the comfort of your PC...

Insert a fully charged batterie.

Perhaps cracked/dry/cold solder joints on the USB port of the controller. Have a look here: https://phantompilots.com/threads/phantom-3-pro-will-not-conneect-to-app-no-video.152656/#post-1518184

So the app is not the problem.

More information is needed: -What drone ? -What DJI app and what version ? -What RC's (GL300?) -What are the Status LED's of the AC & RC's telling you ? Download and consult the User Manual for this. -What Firmware versions are the RC's on ? -What Firmware version is the AC on ? -Post a/some...

Contact Litchi: https://flylitchi.com/contact-us

Insert a compatible SD card in the camera

"both the AC and RC is all updated to the last release" That doesn't mean anything to me, you need to specify the version numbers. A blinking green status LED means there's no connection between the drone and controller. Possible causes/solutions: -Relink the controller with the drone -There's...

Page 26 in the Mavic Air User Manual. https://www.dji.com/nl/downloads/products/mavic-air

The drone & remote controller need matching firmwares. In other words: When you down- or upgrade the firmware of the remote controller, you most likely also have to down- or upgrade the firmware of the drone. Download the Release Notes to read/learn about them...

First of al, you never mentioned the versions you use of: -The DJI GO app -The Firmware of the drone and remote controller and don't say "the latest", that doen't mean anything ! When the LED on the remote controller is a solid green, the aircraft and remote controller are linked together. You...

That's incorrect. Only 2 on opposite corners have security pins installed. All 4 corners have a rubber damper installed. "Having all 4 in place will create the vibration, or wobble, you speak of" Also incorrect, ALL phantoms (3 & 4 series) came with 4 dampers installed.

That's a gimbal issue (wobble). -Check the 4 white damping rubbers. -Check if the 3 axis of the gimbal rotate freely, without any friction (use a camera lens air blower to clean). -Calibrate the gimbal.

VOLTCRAFT DSO-2154

DJI GO 4 does NOT work with the Phantom 3 series drones !