Recent content by Reymer_cvx

Hey I went onto the screen and changed to NTSC and worked like it should, changed gopro and screen back to pal and all is good. Must of changed while on the gopro app in my pocket or something. Thanks really appreciate it

Looks as though there is 3 frames infront of the main picture

Didnt have the gimbal plugged in or the gopro on in that photo, with gopro on its basically the same picture with what the gopro is seeing. Live in New Zealand. Both transmitter and screen on the same channel.

This is what the screen is showing

Hi my fpv screen all of a sudden stopped working properly between 2 days, worked fine one day then 2 days later it shows about 5 of the normal screen picture in one all crossed with eachother. Any ideas? Had it open and checked all the plugs and they seem fine.

tryed my mates cable and compass, his all worked fine and put in mine and nothings changed, fairly stumped now

Gunna borrow my mates one and see if it is the problem in a few days

Compass cable

I think there is a problem with thst cable. Worked with phantom apart, put it back together and stopped again. Wiggle thewire and it goes and stops

Had shell open and checked the plug and GPS module. All is good andwas in place. The cable though, the bit that goes onto the leg was unplugged at the leg end. I have home made legs on it and was in behind tape and must have taken a knock. Works as it should, thanks heaps for the help much...

Crashed my phantom 2 the other day at low height since then i havnt been able to get gps sattilies with the remote turned on, with the remote off it shows 10 sattilites on the fpv screen untill i turn remote on then drops straight to 0 satilites. any ideas?