Recent content by Paul007uk

Good luck with the flash hope it works for you, let me know how you get on.

Hi i copied this from the dji forum, it tells you how to test each board in the wifi module via ping test. 192.168.1.10 is the video transmission board, if no responce it will need re flash to get video back. Hope this helps you out abit. How to diagnose broken DJI Phantom 2 Vision+ Wi-Fi FPV...

Hi no he does not heatsink as its usually not needed. I think people thought it was heat issue until the nand corruption problem was discovered. Mine was also the v2 module with no holes so i looked online and thought for sure it would be overheat issue, but after flash its restored live video...

Dji forums, i think someone made a pdf.

Hi you can no longer get replacement new only second hand modules. You need to flash the board to fix it, follow the instructions posted for flash or send it to someone who can do the flash for you. I sent mine to another forum user, am sure there are a few people offering flash repair service...

Hi did you get this sorted? If your module did not respond to ping then you more than likely need to flash. I did not want to attempt flash my self so sent to another forum user who did it for me. Am sure there are a few people offering flash repair service via post. If you want i could contact...

Hi have you confirmed that the wifi video transmission module is ok as this is a massive problem with these drones and would cause you to have no video feed regardless of what you fix on the gimbal.

Hi there is a difference in motors between the vison plus and vision plus v3 which has upgraded, more powerfull motors.

Hi mine was repaired with a nand flash. Seems the firmware goes corrupt on the video transmission board and becomes unresponsive. Alot of people just assume its overheated when its not the case. I think you need to solder a usb serial adapter to the board in order to flash it but am not sure of...

Hi you can try ebay they do come up but check everyday as they sell quick. Or try to find someone on here selling one but they are almost impossible to get new atleast in the uk they are. As ive already said mine was repaired via the flash method so if you still have the old one that could be...

Hi my module was bad with no live feed and no responce on the ping test. Sent mine to rmhome who fixed it with the lightbridge flash method. Mine is the old module with no vents so i thought it was overheat but its corrupt firmware causing it. I think the firmware from the lightbridge and the...

32 with P2v+(v3)

No problem. Mine was fixed by a forum user i sent it to, apparently the firmware becomes corrupt and makes the fpv board unresponsive. The board was flashed and i have my live video feed back. Most people think they have overheated but seems thats not always the case. If you can find a module on...

Download an app for android called ping and connect your phone to the phantom wifi. Start the ping app, enter the ip address 192.168.1.10 and see if you get a responce.

Ok are you using android or ios on your phone/tablet?