Recent content by michaelts

Great post! I cannot stress enough the importance of being able to fly in ATTI mode confidently. A couple of times the same happened to me, and I know well the feeling. The key here is not to panic, but remain calm which is possible only if you are prepared and know exactly what to do in this...

I just want to make a small correction. Suppose that one plans a mission with waypoints A and B, and the speed between A and B is 30mph. Suppose also that there is a wind and the drone could not fly at 30mph, but flies, let's say, at 20mph. If the connection with the RC is lost between A and B...

The issue is that the RC failed to indicate to me and to the smartphone that the connection was re-established. I was able to control the drone when it came back from the mission, but the issue is that I had no clue about it, I discovered this wholly accidentally--despite LED indicator and the...

I have some questions about flying a mission during which the connection with RC is lost. I fly P3S. Several minutes after the connection with the RC is lost, the RC starts beeping. How can I stop the beeping? Do I turn the RC off , and then immediately turn it back on? The RC of P3S has...

The address where the drone was misbehaving is 224 SE 4th St, Moore, OK 73160. Looking at Google's satellite map, I do not see anything unusual about that location. There are no mountains and no high rise building anywhere near that place. The landscape is completely flat. Considering that the...

Golotaguy, thank you very much for posting the log file. I analyzed it using CsvView which is available at CsvView/DatCon . This is what I found: 1) The drone gradually reached altitude of ~122m relative to the take-off point, and was flying at that altitude for about 2km with speed of...