Recent content by jexhead

I have now flow in areas with no data/ internet and did not have an issue. However as some others are reporting. I did fly around my home town and suffered from video feed loss. Which i have never seen before so. if you have not updated (dont) at this stage.

Its possible i did not explain my question well. due to where i live, (Australia) and where i fly - there is not internet connection possible (no phone data via hot spot or tablet data via sim card) i read the release note as being. If you are not connected or logged into the app Eg: the app...

Going by the release notes (which i should have read first) "reads" For increased safety, the flight is restricted to a height of 30 m and distance of 50 m when not connected or logged into the app during flight, including DJI GO and all apps compatible with DJI aircraft. So if i fly in an area...

At this stage the fix is a new RC (sorry for not including this) In using a RC from another Phantom there was no longer a fault. It is also to be noted - in (help guide for the phantom 3 Adv Pro) by Fantomas Page 44 under DJI issues - 1.Non - visual live feed image i.e a blank screen that...

Up - Date on the Yellow flashing lights - SOLVED Firstly a BIG thank you to all the members that replied with thoughts and advise. There was more than 1 fault. first and biggest fault was that the RC said it was connected to the AC (correct lights) but the Ap (dji go) displayed the word...

Hi Thanks for the tip - but sadly nothing. Held buttons as required and turned RC off and inserted USB stick with latest firmware (same as craft) turn RC back on and 1 (red) light and 4 (white ) lights - nothing goes blue. Could it be a dead RC - can i swap my other RC over to this craft and...

Phantom help is correct pushing the button on the AC after trying to link through the RC does not help. the light goes from flashing RED / Green to Red only.

Thank you for the input and sorry for not listing the FW AC is running FW V01.10.0090 Not sure about RC as i can not get any output to the app to check. ( is there another way to check) And i can not get the RC to respond to the firmware at all. Eg firmware loaded on a usb stick or on the sd...

The video is here Hope this helps confirm my error. I want to fly

Hi and thanks for your input. I have tried a number of times to link the RC but the app displays (confirmfrequency settings) The light on the RC is green (as if it is linked) after you turn on the AC the light on the gimbal is also green ( after the AC runs through its warm up) The app shows...

Hello everyone, looking for some help here with a Phantom 3 advance. when you power up in this order, this happens (power on to RC) - red light (power on to AC) - camera light flashers green - rear lights flash Red (short) - Green (short) - amber & red (long) - amber flash (fast) as the rear...