Recent content by jabatan

Hmm... Do you have a picture of the Tablet Extender? I can definitely look at this. It is a simple modification in my 3D design.

Tony, I don't have the Maxxrange panel but if it is using the same size metal bracket, then this should work. Regards David

Below is a quick video on how to install the mount.

I've been working on this idea the last 2 weeks and after almost 10 iterations, I think I have finally nailed it. Once you have screwed in the Mounting Adapter to the DBS long range antenna, you are now able to easily clip it on to the phone holder and remove it within seconds. This has worked...

Thanks Rigger609

Thanks LeoS. In that 1 hour, I took flights. Total flight time was probably less than 20 minutes.... and with some juice left to spare. I brought two batteries but was able to cover it all in 1 battery. As this was my first time flying the quad over such a large expanse of water, I was very...

I had my first Phantom 2 flight in Singapore's Marina Bay area and managed to put together a short video to share with everyone. Enjoy. http://vimeo.com/84081553

Finally got my Phantom 2 last week and started to set it up with my previous Phantom's FPV gear. I'm still new to the whole FPV flying thing but it is a great relieve to know that I can now fly for 25 minutes without having to worry about battery life every 2 minutes like I did on my previous...

Guys: I thought that I share my very first full flight video as I finally got to fly my Phantom setup in a nearby park here in Singapore. Special thanks to all those who helped me in this forum earlier to resolve a problem I had with my Phantom setup. http://youtu.be/PZd6hLmdJXk Cheers!

Only problem with the upgrade board is that if you plan to do FPV, and add on the iOSD Mini (awesome!), the upgrade board will not work as you need a CAN-Bus port. *sigh*

I had a similar problem at one time when I saw very bad static but could make out very faintly, some resemblance of the picture I was taking. It drove me crazy thinking that my Immersion TX was faulty. I then switch to Channel 2 on the Immersion TX board, rebooted my Fatshark Attitude, and...

Not possible as the upgrade kit does not have a CAN-bus to connect the iOSD. This is a known setback. That is why mine is still using the stock Phantom board and then I add in Zenmuse -> iOSD ->PMU.

Re: New Phantom does not 'take-off' from ground at full thro jumanoc: Great advise!!! I'll be sure to practice that.

Re: New Phantom does not 'take-off' from ground at full thro FINALLY!!!! Special thanks to Driffill and everyone who contributed in helping. I successfully flew my quad last night and had one of the most liberating 15 minutes of flight (included a couple of crashes as this is my first time)...

Re: New Phantom does not 'take-off' from ground at full thro Driffill: I think I may have found the problem. On my Mode 2 TX, I currently see the following linked up. AIN1 = RIGHT STICK (from front, on left looking into the back of Tx) left-right movement ROLL AIN2 = LEFT STICK, up-down...