Recent content by GlennG

I have 21 flight on P3 and I1. Seems very solid. Speed is back.

Best of luck. If wind is steady, you'll be fine. Watch for gusts.

This is the best system I've found. Agree 100%

I use Dronenerds. They work on them as well if you have problems. Great guys to work with. Good Luck.

Look under the aircraft>sensors once in camera view. Do it even if it says you don't have to if you just did update.

Perfect explanation! I put mine in the beer fridge for about an hour before doing the calibration. When it is cold, it won't take the aircraft as long to earn up.

Hope everything works out. fine an open field and do some practicing. Those modes can be a bit tricky if you are new. Best of luck on next flight. Might recommend a gimbal guard.

I think he is assuming only one battery. I keep the sd care on the bird to update the batteries. Once they are all updated, I reformat the sd card to remove the .bin file.

I leave mine on the sd card.

Does the firmware on the ac do it? I've always left mine on the card to update batteries.

Leave the .bin file on SD card to update batteries.

I wouldn't do it. Always have a full battery. Some have done it with no issues but a bunch have problems. I just don't do it.

Might need to get a Class 10 U3 SD card if you are referring to 4K videos.

Try a different cable and make sure the USB is fully inserted. If you see DISCONNECTED at the top of the screen, your RC USB isn't connecting to the mobile device. I had same problem. New cable was the solution. Good luck. Suggest you calibrate the IMU before you fly since you updated the...

Yes. Already done.