Recent content by David Yerian

No problem I have A P3P-4K which I upgraded to use Fpv goggles and a P3A-4K and learned from experience so I know what you're going through.

I use that iPad mini fourth GEN and it works great

400 feet is your ceiling according to FAA rules you should not exceed 400 feet it is best to fly between two and 300 feet if you want to fly at that I high of an altitude I generally fly around 150 feet if I'm over over things and 50 to 75 feet if I'm trying to get good photos of the things on...

Do not hook through your USB cable that is for older versions of firmware updates you have to do it through the microSD card with no cables plugged into your drone at all

Download the file from the DJI site the firmware update should be 1.9.60 then put it on your micro SD card make sure there is nothing else on there and make sure that the file that you have on the microSD card is a just the .bin file don't put the whole folder on the microSD card just put the...

There are several good videos on Utube that will walk you through the upgrade process.

It should be 1.9.60

There is a hack that you can download so you can open up all 32 channels in the DJI go app and that may help you get longer range if you can find a channel that has less interference on it the only problem with that is the DJI app will only scan the original 12 channels and on all the remaining...

There is a hack that you can download so you can open up all 32 channels in the DJI go app and that may help you get longer range if you can find a channel that has less interference on it the only problem with that is the DJI app will only scan the original 8 channels and on all the remaining...

Just a suggestion but I highly recommend the Litchi App. It's worth the $25.00. This app puts the Dji app to shame. I started out using the Dji app but would always have video signal problems Etc.... So I did some research and switched over to Litchi and never looked back.

It looks like you pulled the center wire out of the cable, the cable is like a coaxial cable so getting a new cable is one option but it is still possible that you have damaged the main circuit board.

If your talking about the wires that run from the antennas to the lower circuit board you are probably screwed, the bottom circuit board is very sensitive and any static discharge or rough handling will destroy the board. I have the same argyle antennas and they work great. Check and make sure...

Utube has several good people who have great information and step by step instructions on how to use, upgrade, and fly your phantom.

I will as soon as the weather gets better.