Recent content by chimpusmaximus

  1. C

    FC40 - FPV range problem (immersion 2.4G tx + boscam 802 rx)

    Re: FC40 - FPV range problem (immersion 2.4G tx + boscam 802 I have a similar set up with immersion 2.4TX 700mw (2.4G leaf antenna) Lawmate 2.4RX or more recently a dvd screen with 2.4ghz receiver built in, both using 8dbi direction antenna I managed 1km with no issue what ever. 500m is ok...
  2. C

    OSD on the FC40... and DJI said it couldn't be done

    Managed with manual calibration in code to get within 0.01v MinnazaOSD by chimpusmaximus, on Flickr
  3. C

    OSD on the FC40... and DJI said it couldn't be done

    How do you calibrate on the N1-OSD?
  4. C

    OSD on the FC40... and DJI said it couldn't be done

    Chimpusmaximus came about when i started in IT many years ago. When i messed up it was normal big time :-) Wayne I'm using the same app for config. I have had a good look over the code that is used to compile the firmware. FlightBatt.h has the following which is used as par to the...
  5. C

    OSD on the FC40... and DJI said it couldn't be done

    Thats pretty close but as you say would be nice to be correct.
  6. C

    OSD on the FC40... and DJI said it couldn't be done

    How are you finding he voltage reading? is it accurate if you check with a multi meter? Only reason i ask is i have been playing around with minnazaosd and can get within 0.2v accuracy. Thanks
  7. C

    easy wifi booster

    I have used a TP-Link TL-WA830RE 300Mbps Wireless N Range Extender which needed 9v DC. I supply this from a small 12v lead acid battery with a drop down convertor like LM2596 DC-DC Switching Adjustable Step Down Voltage Regulator Buck Converter and a 2.5mm dc socket.
See more