Recent content by ANARCHY_85

I replaced the I replaced the board no improvement. I ordered a flex cable idk if that would help. Is there a way to know which or the motors would need replaced? How much is your charge to repair?

P4 standard w a limp gimbal. Received gimbal motor overload and has not worked since. On startup it doesn’t do the sweeping motion. I have replaced the board on the gimbal with no improvement. based on what I’m reading it may be the motors on the gimbal. What are your thoughts?

I get the same error on my P4 when trying to update firmware on Assistant 2. Goes to 99% download and either sits there forever or shows failed. Did you find a fix for this issue? I don't have an OTG cable to try the update with GO4. My controller also needs to be updated and will not connect to...

Thank you for the reply! The board looks like it's super easy to fix, not sure about the motor but I'll check it out on youtube. Which one should I replace first?

My P4 standard has a limp gimbal and shows video feed but is non-responsive. It doesn't do the startup sweep but shows as connected on the GO4 app. It was damaged when I put an approved lens filter on it for a flight and hasn't worked since then. Could this be the flex cable, or the motors on...

I have a P4 standard with a GL300B controller. I've tried to update the drone on DJI Assistant 2 and it fails to accept the either of the two available updates showing in queue. I bought my P4 used and it didn't come with the OTG cable so PC is the only option I have currently to update. I've...

Bro thank u for posting this. I didn’t know the p4’s were able to utilize several models of controllers (minus v2). Mine needs an antenna or a new controller. My M2pro needs a gimbal arm and likely a roll motor. Luckily my fpv is currently in a non-crashed state and my Skydio 2 is still ****...

My M2pro fell from the sky without warning shortly after takeoff, luckily it wasn’t up too high and didn’t hit anything else. Unfortunately I noticed the camera was facing backwards and was kinda stuck. I was able to get it moved back but when I tested it the camera was off center and gimbal...

Does this inspire antenna function as the DJI P4 antenna I’m replacing (2.4/5ghz)? I’ve opened it to see what I’ll be working with and it seems very straightforward. Might look at aftermarket options to see how they compare. Thanks

p4 controller right antenna broken. Can I use any WiFi antenna available on Amazon or does it need specific parameters or a WiFi card to be connected in order to transmit the video signal from the drone?